Pass4Test peut offrir la facilité aux candidats qui préparent le test Microsoft 070-561-VB. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Microsoft 070-561-VB selon le résumé de test réel Microsoft 070-561-VB. Vous pouvez réussir le test à la première fois sans aucune doute.
Le test Microsoft 070-561-VB est l'un très improtant dans tous les tests de Certification Microsoft, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Microsoft 070-561-VB est une bonne examination. Mais c'est difficile à passer le test Microsoft 070-561-VB. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Microsoft 070-561-VB est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
Code d'Examen: 070-561-VB
Nom d'Examen: Microsoft (TS: MS .NET Framework 3.5, ADO.NET Application Development)
Questions et réponses: 99 Q&As
Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Microsoft 070-561-VB avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Microsoft 070-561-VB plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Microsoft 070-561-VB plus facilement avec la Q&A de Pass4Test.
Il y a nombreux façons à vous aider à réussir le test Microsoft 070-561-VB. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Microsoft 070-561-VB est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Microsoft 070-561-VB peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.
070-561-VB Démo gratuit à télécharger: http://www.pass4test.fr/070-561-VB.html
NO.1 End Using
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 08?
A. reader.Read()
bulkCopy.WriteToServer(reader)
B. bulkCopy.DestinationTableName = "Transactions"
bulkCopy.WriteToServer(reader)
C. bulkCopy.DestinationTableName = "Transactions"
AddHandler bulkCopy.SqlRowsCopied, _
AddressOf bulkCopy_SqlRowsCopied
D. While reader.Read()
bulkCopy.WriteToServer(reader)
End While
Answer: B
certification Microsoft 070-561-VB 070-561-VB 070-561-VB
NO.2 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(sourceConnectionString)
02 Using connection2 As _
New SqlConnection(destinationConnectionString)
03 Using command As New SqlCommand()
04 connection.Open()
05 connection2.Open()
06 Using reader As SqlDataReader = command.ExecuteReader()
07 Using bulkCopy As New SqlBulkCopy(connection2)
08
09 End Using
10 End Using
NO.3 End Using
NO.4 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You need to separate the security-related exceptions from the other exceptions for database operations at
run time.
Which code segment should you use?
A. Catch ex As System.Security.SecurityException
'Handle all database security related exceptions.
End Try
B. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).[Class].ToString() = "14" Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
C. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Number = 14 Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
D. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Message.Contains("Security") Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
Answer: B
Microsoft 070-561-VB 070-561-VB 070-561-VB 070-561-VB certification 070-561-VB
NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(connectionString)
02 Dim cmd As New SqlCommand(queryString, connection)
03 connection.Open()
04
05 While sdrdr.Read()
06 ' use the data in the reader
07 End While
08 End Using
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. Dim sdrdr As SqlDataReader = _
cmd.ExecuteReader()
B. Dim sdrdr As SqlDataReader = _
cmd.ExecuteReader(CommandBehavior.[Default])
C. Dim sdrdr As SqlDataReader = _
cmd.ExecuteReader(CommandBehavior.SchemaOnly)
D. Dim sdrdr As SqlDataReader = _
cmd.ExecuteReader(CommandBehavior.SequentialAccess)
Answer: D
Microsoft 070-561-VB certification 070-561-VB 070-561-VB examen 070-561-VB examen
NO.6 End Using
NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim queryString As String = "Select Name, Age from dbo.Table_1"
Dim command As New _
SqlCommand(queryString, DirectCast(connection, SqlConnection))
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. Dim value As Object = command.ExecuteScalar()
Dim requiredValue As String = value.ToString()
B. Dim value As Integer = command.ExecuteNonQuery()
Dim requiredValue As String = value.ToString()
C. Dim value As SqlDataReader = _
command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(0).ToString()
D. Dim value As SqlDataReader = _
command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(1).ToString()
Answer: A
Microsoft 070-561-VB 070-561-VB
NO.8 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named orderDS. The object contains a table named Order as
shown in the following exhibit.
The application uses a SqlDataAdapter object named daOrder to populate the Order table.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub FillOrderTable(ByVal pageIndex As Integer)
02 Dim pageSize As Integer = 5
03
04 End Sub
You need to fill the Order table with the next set of 5 records for each increase in the pageIndex value.
Which code segment should you insert at line 03?
A. Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, pageIndex, pageSize, "Order")
B. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, startRecord, pageSize, "Order")
C. Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, pageIndex)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
D. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, startRecord)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
Answer: B
Microsoft 070-561-VB 070-561-VB examen certification 070-561-VB 070-561-VB examen
NO.9 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _
New OdbcConnection(connectionString)
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _
New OleDbConnection(connectionString)
C. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _
DbProviderFactories.GetFactory("System.Data.Odbc")
Dim connection As DbConnection = _
factory.CreateConnection()
D. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _
DbProviderFactories.GetFactory(databaseProviderName)
Dim connection As DbConnection = factory.CreateConnection()
Answer: D
Microsoft 070-561-VB 070-561-VB examen 070-561-VB
NO.10 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a TextBox control named txtProductID. The application will return a list of active
products that have the ProductID field equal to the txtProductID.Text property.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Function GetProducts(ByVal cn _
As SqlConnection) As DataSet
02 Dim cmd As New SqlCommand()
03 cmd.Connection = cn
04 Dim da As New SqlDataAdapter(cmd)
05 Dim ds As New DataSet()
06
07 da.Fill(ds)
08 Return ds
09 End Function
You need to populate the DataSet object with product records while avoiding possible SQL injection
attacks.
Which code segment should you insert at line 06?
A. cmd.CommandText = _
String.Format("sp_sqlexec 'SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1'", _
txtProductID.Text)
B. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.Prepare()
C. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.CommandType = CommandType.TableDirect
D. cmd.CommandText = "SELECT ProductID, " + _
"Name FROM Product WHERE ProductID=@productID AND IsActive=1"
cmd.Parameters.AddWithValue("@productID", txtProductID.Text)
Answer: D
Microsoft examen 070-561-VB 070-561-VB
NO.11 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim query As String = _
"Select EmpNo, EmpName from dbo.Table_1; " + _
"select Name,Age from dbo.Table_2"
Dim command As New SqlCommand(query, connection)
Dim reader As SqlDataReader = command.ExecuteReader()
You need to ensure that the application reads all the rows returned by the code segment.
Which code segment should you use?
A. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.Read()
End While
B. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.NextResult()
End While
C. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.NextResult()
While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
D. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.Read()
While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
Answer: C
Microsoft certification 070-561-VB certification 070-561-VB
NO.12 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. Try
If conn IsNot Nothing Then
conn.Close()
' code for the query
End If
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Open()
End If
End Try
B. Try
' code for the query
conn.Close()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Open()
End If
End Try
C. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Close()
End If
End Try
D. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Close()
End If
End Try
Answer: C
Microsoft examen 070-561-VB examen 070-561-VB 070-561-VB examen certification 070-561-VB
NO.13 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim col As New DataColumn("UnitPrice", GetType(Decimal))
02
03 OrderDetailTable.Columns.Add(col)
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity"
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)"
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value, 1)"
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)"
Answer: D
Microsoft certification 070-561-VB 070-561-VB certification 070-561-VB
Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.
没有评论:
发表评论