Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test IBM 000-375 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.
Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test IBM 000-375 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test IBM 000-375.
Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A IBM 000-375 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat IBM 000-375 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test IBM 000-375.
Code d'Examen: 000-375
Nom d'Examen: IBM (IBM WebSphere Process Server V6.2, System Administration)
Questions et réponses: 107 Q&As
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification IBM 000-375, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification IBM 000-375. Peut-être d'obtenir le Certificat IBM 000-375 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
Le test IBM 000-375 est l'un très improtant dans tous les tests de Certification IBM, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
000-375 Démo gratuit à télécharger: http://www.pass4test.fr/000-375.html
NO.1 A WebSphere Process Server deployment environment is used by the development team. The
Common Event Infrastructure (CEI) was configured to be on its own Derby database. The functional and
recovery tests have passed the Proof of Concept (PoC). The next stage will be to conduct performance
tests on a staging environment. For consistency, the production environment will use the same topology
as the staging environment. Which action must the system administrator take to improve performance for
the staging system?
A. Configure CEI to use multiple Derby databases.
B. Configure a deployment environment referencing a high performance database instead of Derby.
C. Configure the CEI database to be on the same server as the WebSphere Process Server db
D. Configure the CEI database to be on the same server as the Messaging database to minimize network
latency.
Answer: B
IBM 000-375 000-375 000-375 examen
NO.2 Which IBM product is an integral part of WebSphere Process Server?
A. WebSphere MQ.
B. WebSphere Business Modeler.
C. WebSphere Enterprise Service Bus (WESB).
D. WebSphere Service Registry and Repository (WSRR).
Answer: C
certification IBM 000-375 000-375 certification 000-375
NO.3 A system administrator wants to create a stand-alone profile and minimize the steps to complete the
task. The profile should be configured to use DB2 as the backend database and have the Business
Process Choreographer component configured. How should the administrator proceed to create the
stand-alone profile?
A. Use the advanced profile creation option.
B. Use the deployment environment creation option.
C. Use the createprofiles command to create the profile silently as additional configuration options can be
enabled in the responsefile.
D. After creating the stand-alone profile, augment the profile with the default.bpc template.
Answer: A
IBM 000-375 000-375
NO.4 A new business integration application retrieves and processes sensitive information from an Enterprise
Integration System (EIS). The connection is established using a WebSphere JCA adapter export
component. To protect the target component (wired) processing the data, the system administrator plans
to enable security on WebSphere Process Server. Which action should be performed to integrate the
adapter component in this environment?
A. No action is required because the JCA adapter does not support any inbound authentication
mechanisms.
B. No action is required. In a security enabled environment all EIS connections to back-end systems are
secured by default.
C. The run-as role should be set on the target component of the adapter export to protect downstream
component access.
D. The adapter export component should be configured to use a J2C authentication alias to access the
downstream components.
Answer: C
IBM 000-375 000-375 000-375
NO.5 A business process event has failed. Assuming events are enabled, how may an administrator most
easily examine the end-to-end process flow that led to the failed event, working from the Failed Event
Manager?
A. From the failed event Details page, click rowse Related Common Base Events?
B. From the failed event Details page, click pen calling process in Business Process Choreographer
Explorer?
C. Select the failed event, click esubmit with Trace? and view component logs.
D. Enable tracing on the Failed Event Manager, and resubmit the original request.
Answer: A
certification IBM 000-375 certification 000-375 000-375
NO.6 Which tool should the administrator use to apply the fix packs and updates to an IBM WebSphere
Process Server?
A. Profile Management Tool
B. IBM Support Assistant (ISA)
C. IBM Installation Manager
D. Update Installer for WebSphere Software
Answer: D
IBM examen certification 000-375 000-375 examen 000-375
NO.7 A system administrator wants to create a stand-alone profile and run Business Space on the
corresponding server. The administrator will need to store the Business Space tables in a DB2 database.
What is the best method for the administrator to create the profile and enable Business Space support?
A. Business Space is not supported for a stand-alone profile.
B. Run the manageprofiles command using the -configureBSdb option.
C. Create the profile using the typical installation which installs and configures Business Space.
D. Create the profile using the Profile Management Tool and install and configure Business Space using
the Integrated Solutions Console.
Answer: D
IBM examen 000-375 certification 000-375 000-375
NO.8 A company plans to use WebSphere Business Space widgets. The development team has
implemented custom widgets using the Representational State Transfer (REST) services of the Business
Process Choreographer API. Security is an important aspect and all communication channels and APIs
must be security enabled. Before the development team can test the installed widgets in a secured
environment, which action should be performed by the system administrator?
A. Change the communication protocol of all relevant REST service endpoints to use HTTPS.
B. No action needs to be taken because the REST service endpoints do not support HTTPS protocols for
API access.
C. Enable administrative security and disable application security on the server or cluster hosting the
REST service endpoints.
D. Remove all HTTP port mapping from the list of virtual hosts to automatically use HTTPS ports and
communication channels.
Answer: A
IBM 000-375 certification 000-375
NO.9 A company requires a business process that consists of multiple discrete steps which will run over a
period of several weeks. Some of these activities will be executed in parallel. Which type of business
process is this?
A. Microflow
B. Synchronous
C. Interruptible
D. Uninterruptible
Answer: C
IBM examen 000-375 examen 000-375 000-375 examen 000-375 examen
NO.10 In a clustered IBM WebSphere Process Server environment, a company has created two application
deployment clusters using a single remote messaging engine cluster in the same cell. Client and server
applications are communicating via asynchronous Service Component Architecture (SCA) invocations.
Each application is deployed to a different cluster. Which task must the system administrator perform to
establish connectivity between the applications?
A. There is no need to change the configuration.
B. Configure a new messaging engine cluster.
C. Advise the development team to replace the SCA bindings with Web Service bindings.
D. Create a bus link between the SCA.SYSTEM and SCA.APPLICATION bus to establish connectivity.
Answer: A
certification IBM 000-375 000-375 000-375 000-375
NO.11 A developer is trying to change the settings for the Business Process Choreographer container
authentication alias (BPC_Auth_Alias) that was created during the profile creation step. An error message
indicating the developer does not have sufficient authority to change the settings is displayed. Which one
of the following is the minimum role a system administrator should grant to the developer to correct this
error?
A. Deployer role
B. Operator role
C. Configurator role
D. Administrator role
E. Adminsecuritymanager role
Answer: C
IBM examen certification 000-375 certification 000-375 000-375 000-375 examen 000-375
NO.12 The Service Integration Bus Browser is a tool available from the Integrated Solutions Console (ISC) that
allows the system administrator to perform which tasks?
A. View runtime properties of messaging engines.
B. View runtime properties of messaging engines, and modify message contents.
C. View runtime properties of messaging engines, queue depths, and message contents.
D. View runtime properties of messaging engines, queue depths, and message contents, and perform
administration of queued messages.
Answer: C
IBM 000-375 examen 000-375
NO.13 A company has an IBM WebSphere Process Server clustered environment running. A system
administrator is asked to configure a LDAP people directory provider to be used by human tasks. Which
action should the system administrator take?
A. Configure the URL of the local LDAP server on all nodes within the cluster.
B. Configure the people directory provider on the cell that contains the cluster.
C. Configure the people directory provider on every node that hosts members of the cluster.
D. Configure a custom property listing on the nodes within the cluster; then configure the people directory
provider on the node associated with the custom property.
Answer: C
certification IBM 000-375 certification 000-375
NO.14 Which component in the SOA core layer provides basic event management services to applications
which require them?
A. The event catalog application
B. The event management component
C. The Common Base Event (CBE) service
D. The Common Event Infrastructure (CEI)
Answer: D
IBM examen 000-375 certification 000-375
NO.15 When a system administrator creates an IBM WebSphere Process Server profile and selects Enable
administrative security, an administrator user name must be supplied. This identity is used as a default for
all underlying components. After the installation, which of the following components should be configured
to appropriate users from the user repository?
A. Human Task Manager
B. Business State Machine
C. Business Process Choreographer
D. Common Event Infrastructure (CEI)
E. Service component architecture (SCA)
Answer: C,D,E
certification IBM 000-375 000-375 certification 000-375
NO.16 A WebSphere Process Server module is performing poorly. What can a system administrator do to
improve the performance?
A. Turn off state observers that are not needed.
B. Configure module to use application security instead of Java2 security.
C. Optimize performance by installing a Derby database on each node in a cluster.
D. Ensure XA datasources are selected if Common Event Infrastructure (CEI) is used.
Answer: A
IBM 000-375 certification 000-375 000-375
NO.17 A system administrator is configuring a new Business Process Choreographer (BPC) container via the
Integrated Solutions Console (ISC). The database administrator has confirmed that the tables that the
container needs are already present in the database. On completion, the administrator installs the
BPCIVT application in order to verify the configuration. On starting the application, many failures are seen
in the server logs with the following output CWWBF0030E: Error during update of Business Process
Choreographer database with processes for application BPCIVT: CWWBA0010E:
com.ibm.db2.jcc.c.SqlException: "BPEBE00.SCHEMA_VERSION" is an undefined name What is the
cause of this problem?
A. The database name in the BPC configuration is incorrect
B. The User Id that the BPC database connection uses is incorrect
C. The Schema Name in the BPC configuration is incorrect
D. The scope that the BPC database has been configured at is incorrect
Answer: C
IBM 000-375 examen 000-375
NO.18 A company is installing IBM WebSphere Process Server using the Launchpad and wants to create one
stand-alone IBM WebSphere Process Server and one stand-alone IBM WebSphere Application Server.
They want to minimize the steps required to create this environment. What background information does
the administrator need to know to accomplish these goals?
A. Only the IBM WebSphere Process Server stand-alone server can be created during installation.
B. Only the IBM WebSphere Application Server stand-alone server can be created during installation.
C. Either the IBM WebSphere Application Server stand-alone server or the IBM WebSphere Process
Server stand-alone server can be created during installation.
D. Both the IBM WebSphere Application Server stand-alone server and the IBM WebSphere Process
Server stand-alone server can be created during installation.
Answer: A
IBM 000-375 examen 000-375 examen 000-375 examen 000-375 000-375
NO.19 A credit approval service implementation is frequently updated. Which WebSphere Process Server
component should be used to route the client application to the latest release?
A. A selector
B. A business rule
C. A mediation flow
D. An interface map
Answer: A
certification IBM 000-375 examen 000-375 000-375
NO.20 An administrator is configuring an existing Business Process Choreographer (BPC) configuration to
use a new database. The new database product is different from the one currently being used. Which
step should an administrator take to ensure that the tables that BPC requires will be present in the new
database?
A. Use the bpeConfig.jacl script to create the new database tables
B. In Business Process Choreographer configuration, ensure the Create Tables option has been
selected.
C. Use the sibDDLGenerator to generate new DDLs for the tables and run the new scripts on the new
database.
D. Export the tables from the previous database and import them into the new database.
Answer: B
IBM 000-375 examen 000-375 examen 000-375 000-375 000-375
Le test IBM 000-375 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test IBM 000-375 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification IBM 000-375.
没有评论:
发表评论