Le matériel de formation de l'examen de meilleur Microsoft MB6-823

Vous avez aussi la possibilité à réussir le test Microsoft MB6-823. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Microsoft MB6-823.

Code d'Examen: MB6-823
Nom d'Examen: Microsoft (AX 2009 Project Series)
Questions et réponses: 89 Q&As

On doit faire un bon choix pour passer le test Microsoft MB6-823. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Microsoft MB6-823 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Le test Microsoft MB6-823 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Microsoft MB6-823. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Microsoft MB6-823. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

MB6-823 Démo gratuit à télécharger: http://www.pass4test.fr/MB6-823.html

NO.1 Which of the following describes why cost templates are used?
A.To define which categories to include in the calculation of a completion percentage
B.To define the ledger integration of a completion percentage
C.To set the mark-up percentage on different category groups
D.To divide the WIP transactions in General ledger
Answer: a

Microsoft   MB6-823   certification MB6-823   MB6-823 examen   MB6-823   MB6-823

NO.2 What is the difference between the Consumed and Finished Item methods for charging production
costs to a project?
A.The consumed method will post item transactions to the project as the production order is ended, while
the Finished Item method will not post any transactions to the project until the project is invoiced.
B.The consumed method will post hour, expense and item transactions to the project as they are
consumed on the production order, while the Finished Item method will post item transactions to the
project as the production order is report as finished.
C.The consumed method will only post raw material consumption costs to the project as they are
consumed on the production order, while the Finished Item method will post the labor and machine costs
to the project in addition to the raw material consumption cost.
D.There is no difference between the two methods in how they charge production costs. The two methods
determine how the production order will be scheduled.
Answer: b

Microsoft   MB6-823 examen   MB6-823 examen   MB6-823 examen   MB6-823   MB6-823 examen

NO.3 What is the purpose of the Employee/category validation setup?
A.To apply validation rules on categories for a purchase requisition issued from the employee
B.To prevent an employee from reporting on non-authorized categories on a given project
C.To suggest or control what categories employees may use in project journals
D.To specify the categories where revenue can be accrued when you run the Post revenue script
Answer: c

certification Microsoft   MB6-823   MB6-823 examen   certification MB6-823   certification MB6-823

NO.4 Cost Templates are used in which of the following projects?
A.Summary projects
B.Time and material projects
C.Fixed-price projects
D.Internal Cost projects
Answer: c

Microsoft examen   MB6-823 examen   MB6-823   MB6-823   MB6-823 examen

NO.5 A fixed-price installation project exists between your company and a customer. During the project the
customer requests that you provide additional spare parts. The purchase of these spare parts falls outside
the scope of the original project and you must charge the customer for these items. Which of the following
describes how to create a sales order with which to invoice the customer for the extra items?
A.You can do this anyway, regardless of the project structure and related types
B.Only on a child project of the type time and material
C.This is impossible, you cannot create a sales order for a fixed-price project
D.You can create a sales order from the fixed price project however you must ensure that the line property
for the order lines is chargeable.
Answer: b

Microsoft   MB6-823   certification MB6-823   MB6-823   MB6-823 examen   MB6-823

Vous pouvez tout d'abord télécharger le démo Microsoft MB6-823 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Les meilleures Microsoft 70-642 examen pratique questions et réponses

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

L'équipe de Pass4Test rehcerche la Q&A de test certification Microsoft 70-642 en visant le test Microsoft 70-642. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Microsoft 70-642 sans aucune doute.

Code d'Examen: 70-642
Nom d'Examen: Microsoft (TS: Windows Server 2008 Network Infrastructure, Configuring Certification )
Questions et réponses: 400 Q&As

En quelques années, le test de certification de Microsoft 70-642 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Microsoft 70-642? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification 70-642. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification 70-642, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Microsoft 70-642. Le guide d'étude de Pass4Test comprend les excercices de Microsoft 70-642 et la Q&A qui peut vous permetrre à réussir 100% le test Microsoft 70-642. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

Le test Microsoft 70-642 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Microsoft 70-642 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Microsoft 70-642.

Le test certification Microsoft 70-642 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Microsoft 70-642 puisse augmenter la compétition dans ce marché.

70-642 Démo gratuit à télécharger: http://www.pass4test.fr/70-642.html

NO.1 Your network contains 100 servers that run Windows Server 2008 R2. A server named Server1 is
deployed on the network. Server1 will be used to collect events from the Security event logs of the other
servers on the network.
You need to define the Custom Event Delivery Optimization settings on Server1.
Which tool should you use?
A. Event Viewer
B. Task Scheduler
C. Wecutil
D. Wevtutil
Answer: C

Microsoft   70-642 examen   certification 70-642

NO.2 Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link
connects the main office to a branch office. All computers in the branch office are configured with static IP
addresses. The branch office does not use DHCP and uses a different subnet.
You need to ensure that the portable computers can connect to network resources at the main office and
the branch office.
How should you configure each portable computer?
A. Use a static IPv4 address in the range used at the branch office.
B. Use an alternate configuration that contains a static IP address in the range used at the main office.
C. Use the address that was assigned by the DHCP server as a static IP address.
D. Use an alternate configuration that contains a static IP address in the range used at the branch office.
Answer: D

Microsoft   70-642 examen   70-642 examen   70-642 examen

NO.3 Your network contains a server that has the SNMP Service installed.
You need to configure the SNMP security settings on the server.
Which tool should you use?
A. Local Security Policy
B. Scw
C. Secedit
D. Services console
Answer: D

certification Microsoft   70-642   70-642 examen   70-642 examen

NO.4 Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected
by a firewall that performs symmetric NAT.
You need to allow peer-to-peer communication between all locations. What should you do?
A. Configure dynamic NAT on the firewall.
B. Configure the firewall to allow the use of Teredo.
C. Configure a link local IPv6 address for the internal interface of the firewall.
D. Configure a global IPv6 address for the external interface of the firewall.
Answer: B

Microsoft   70-642   70-642

NO.5 Your network contains a domain controller named DC1 and a member server named Server1.
You save a copy of the Active Directory Web Services (ADWS) event log on DC1. You copy the log to
Server1.
You open the event log file on Server1 and discover that the event description information is unavailable.
You need to ensure that the event log file displays the same information when the file is open on Server1
and on DC1.
What should you do on Server1?
A. Import a custom view.
B. Copy the SYSVOL folder from DC1.
C. Copy the LocaleMetaData folder from DC1.
D. Create a custom view.
Answer: C

certification Microsoft   70-642   70-642 examen   70-642   70-642 examen

NO.6 Your network uses IPv4.
You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with
two network interfaces.
You need to configure routing on the server at the branch office. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Install the Routing and Remote Access Services role service.
B. Run the netsh ras ip set access ALL command.
C. Run the netsh interface ipv4 enable command.
D. Enable the IPv4 Router Routing and Remote Access option.
Answer: A, D

Microsoft examen   certification 70-642   70-642   70-642 examen

NO.7 Your network contains a DHCP server named DHCP1 that runs Windows Server 2008 R2. All client
computers on the network obtain their network configurations from DHCP1. You have a client computer
named Client1 that runs Windows 7 Enterprise. You need to configure Client1 to use a different DNS
server than the other client computers on the network. What should you do?
A. Configure the scope options.
B. Create a reservation.
C. Create a DHCP filter.
D. Define a user class.
Answer: B

Microsoft   70-642 examen   70-642

NO.8 Your network contains a server that runs Windows Server 2008 R2. You plan to create a custom script.
You need to ensure that each time the script runs, an entry is added to the Application event log.
Which tool should you use.?
A. Eventcreate
B. Eventvwr
C. Wecutil
D. Wevtutil
Answer: A

Microsoft   70-642 examen   70-642   70-642

NO.9 Your company is designing its public network. The network will use an IPv4 range of 131.107.40.0/22.
The network must be configured as shown in the following exhibit.
You need to configure subnets for each segment.
Which network addresses should you assign?
A. Segment A: 131.107.40.0/23
Segment B: 131.107.42.0/24
Segment C: 131.107.43.0/25
Segment D: 131.107.43.128/27
B. Segment A: 131.107.40.0/25
Segment B: 131.107.40.128/26
Segment C: 131.107.43.192/27
Segment D: 131.107.43.224/30
C. Segment A: 131.107.40.0/23
Segment B: 131.107.41.0/24
Segment C: 131.107.41.128/25
Segment D: 131.107.43.0/27
D. Segment A: 131.107.40.128/23
Segment B: 131.107.43.0/24
Segment C: 131.107.44.0/25
Segment D: 131.107.44.128/27
Answer: A

Microsoft   70-642   70-642   70-642 examen

NO.10 You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21. The server
is configured to use IPv6 addressing.
You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt?
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Answer: C

Microsoft examen   70-642   70-642 examen   70-642

NO.11 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Routing and Remote Access service (RRAS) role service installed. You need to view all inbound VPN
packets. The solution must minimize the amount of data collected.
What should you do?
A. From RRAS, create an inbound packet filter.
B. From Network Monitor, create a capture filter.
C. From the Registry Editor, configure file tracing for RRAS.
D. At the command prompt, run netsh.exe ras set tracing rasauth enabled.
Answer: B

Microsoft   70-642   70-642

NO.12 You need to capture the HTTP traffic to and from a server every day between 09:00 and 10:00.
What should you do?
A. Create a scheduled task that runs the Netsh tool.
B. Create a scheduled task that runs the Nmcap tool.
C. From Network Monitor, configure the General options.
D. From Network Monitor, configure the Capture options.
Answer: B

Microsoft   70-642   70-642

NO.13 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
SNMP Service installed.
You perform an SNMP query against Server1 and discover that the query returns the incorrect
identification information.
You need to change the identification information returned by Server1. What should you do?
A. From the properties of the SNMP Service, modify the Agent settings.
B. From the properties of the SNMP Service, modify the General settings.
C. From the properties of the SNMP Trap Service, modify the Logon settings.
D. From the properties of the SNMP Trap Service, modify the General settings.
Answer: A

Microsoft examen   70-642 examen   70-642

NO.14 Your company is designing its network. The network will use an IPv6 prefix of
2001:DB8:BBCC:0000::/53. You need to identify an IPv6 addressing scheme that will support 2000
subnets.
Which network mask should you use?
A. /61
B. /62
C. /63
D. /64
Answer: D

Microsoft   70-642   certification 70-642   certification 70-642

NO.15 You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network
connections named LAN1 and LAN2.
You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server
must continue to respond to non-DHCP client requests on LAN2.
What should you do?
A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B. From the DHCP snap-in, create a new multicast scope.
C. From the properties of the LAN1 network connection, set the metric value to 1.
D. From the properties of the LAN2 network connection, set the metric value to 1.
Answer: A

Microsoft examen   70-642 examen   certification 70-642   70-642

NO.16 Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A
DHCP server is deployed on the network and configured to provide IPv6 prefixes. You need to ensure that
when you monitor network traffic, you see the interface identifiers derived from the Extended Unique
Identifier (EUI)-64 address. Which command should you run?
A. netsh.exe interface ipv6 set global addressmaskreply=disabled
B. netsh.exe interface ipv6 set global dhcpmediasense=enabled
C. netsh.exe interface ipv6 set global randomizeidentifiers=disabled
D. netsh.exe interface ipv6 set privacy state=enabled
Answer: C

certification Microsoft   certification 70-642   70-642 examen   70-642 examen   70-642

NO.17 Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.
You need to ensure that the server can communicate with all segments on the IPv6 network.
What should you do?
A. Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B. Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C. Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D. Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
Answer: A

Microsoft examen   70-642 examen   certification 70-642   certification 70-642

NO.18 You have a DHCP server that runs Windows Server 2008 R2. You need to reduce the size of the
DHCP database.
What should you do?
A. From the DHCP snap-in, reconcile the database.
B. From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C. From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D. From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
Answer: B

Microsoft examen   70-642 examen   70-642 examen   certification 70-642   70-642

NO.19 Your company has an IPv4 Ethernet network.
A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a
segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer
named WKS1 requires access to servers on the Private1 network. The WKS1 computer configuration is
as shown in the following table.
WKS1 is unable to connect to the Private1 network by using the current configuration. You need to add a
persistent route for the Private1 network to the routing table on WKS1.
Which command should you run on WKS1?
A. Route add -p 10.128.4.0/22 10.128.4.1
B. Route add -p 10.128.4.0/26 10.128.64.10
C. Route add -p 10.128.4.0 mask 255.255.255.192 10.128.64.1
D. Route add -p 10.128.64.10 mask 255.255.255.192 10.128.4.0
Answer: B

certification Microsoft   70-642 examen   70-642   70-642   certification 70-642

NO.20 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 is
configured as a DNS server.
You need to ensure that Server1 only resolves queries issued from client computers in the same subnet
as Server1. The solution must ensure that Server1 can resolve Internet host names.
What should you do on Server1?
A. Configure Windows Firewall.
B. Create a conditional forwarder.
C. Modify the routing table.
D. Create a trust anchor.
Answer: A

Microsoft examen   70-642   certification 70-642   70-642

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Microsoft 70-642. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Microsoft 70-642. Choisir le produit de Pass4Test particulier pour le test Certification Microsoft 70-642 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Les meilleures Microsoft MB6-821 examen pratique questions et réponses

Le test Microsoft MB6-821 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Microsoft MB6-821 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Le test Microsoft MB6-821 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Microsoft MB6-821. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.

Participer au test Microsoft MB6-821 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Microsoft MB6-821 symbole bien la professionnalité d'un travailleur dans cette industrie.

Code d'Examen: MB6-821
Nom d'Examen: Microsoft (AX 2009 MorphX Solution Development)
Questions et réponses: 75 Q&As

Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A Microsoft MB6-821 de Pass4Test.

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Microsoft MB6-821, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

MB6-821 Démo gratuit à télécharger: http://www.pass4test.fr/MB6-821.html

NO.1 Isaac, the Systems Developer, needs to run a form from his X++ code. Select the correct statement to
replace the /* insert answer here */ comment in the following code:
Args args;
FormRun formRun;
;
args = new args(formstr(inventTable));
formRun = classFactory.formRunClass(args);
/* insert answer here */
A.formRun.init();formRun.prompt();formRun.wait();
B.formRun.init();formRun.run();
C.formRun.init();formRun.run();formRun.prompt();
D.formRun.init();formRun.run();formRun.wait();
Answer: d

certification Microsoft   certification MB6-821   MB6-821 examen   MB6-821

NO.2 To obtain an overview of the data types inherited from AmountMST, which of the following would you
use?:
A.The Reverse Engineering tool.
B.The "Used by" node in the AOT.
C.The "References" node in the AOT.
D.The Application Hierarchy Tree.
Answer: d

Microsoft   certification MB6-821   MB6-821   MB6-821   MB6-821

NO.3 Which of the following are methods on the Args class that will accept a string type as a parameter?
Choose two that apply.
A.caller()
B.name()
C.parm()
D.element()
Answer: bc

Microsoft   MB6-821   MB6-821   MB6-821 examen   MB6-821

NO.4 Isaac, the Systems Developer, has created a new class which extends the RunBase Framework.
He needs to make the query visible on the dialog, for user interaction. Which methods will he need to
override to achieve this?
A.showQueryValues()
B.queryValuesVisible()
C.showQuery()
D.queryVisible()
Answer: a

Microsoft   certification MB6-821   MB6-821 examen

NO.5 When will the default behavior of a select statement be to use literals?
A.When the number of records exceeds the threshold specified in the Server Configuration Utility.
B.When the select joins more than two tables from the table groups: Miscellaneous, Main, Transaction,
Worksheet Header & Worksheet Line.
C.When no locking (forupdate) is specified on the select statement.
D.When an update is performed using an array operation like update_recordset or delete_from.
Answer: b

certification Microsoft   certification MB6-821   MB6-821   MB6-821 examen   MB6-821 examen   MB6-821 examen

NO.6 What is the Args-class used for?
A.It verifies arguments sent to the Called application object.
B.It passes information between running application objects.
C.It handles end-user input.
D.It handles external access to classes in the AOT.
Answer: b

certification Microsoft   MB6-821 examen   certification MB6-821

NO.7 To optimize a While Select statement what should you consider using?
Choose two that apply.
A.Fieldlist
B.Order by
C.Join
D.Quick select
Answer: ac

Microsoft examen   MB6-821   MB6-821 examen

NO.8 Isaac, the Systems Developer, wants to modify the method SalesLine.calcLineAmount(). He wants to
be sure that the change does not cause problems when it is used with the application. How can he find
out where it is used?
A.Use the Reverse Engineering tool
B.Use the Cross-Reference tool
C.Right-click on the method and select Find
D.Right-click on the method and select Compare
Answer: b

Microsoft   MB6-821   MB6-821   MB6-821   MB6-821 examen   MB6-821

NO.9 Which of the following strategies are appropriate to reduce locking of central records in the database?
A.Do not use ttsBegin and ttsCommit when accessing records which can increase the locking.
B.Set up the class to run on the server.
C.Set up the table to use Optimistic Concurrency Control (OCC).
D.Always specify an index to reduce the load on the database.
Answer: c

Microsoft examen   certification MB6-821   MB6-821   MB6-821

NO.10 On which tier is the physical file holding a temporary table placed?
A.It is placed on the tier where the first record in inserted.
B.It is always placed on the AOS, as this will reduce the traffic between AOS server and the database.
C.It is placed on the tier, where the handle is defined.
D.It is always placed on the client to secure the Trustworthy Computing principles.
Answer: a

Microsoft   certification MB6-821   MB6-821   certification MB6-821

NO.11 How would you cache display methods on forms?
A.Modify the DisplayCache form method, adding the element.cache() before super()
B.Set the method modifier to Cache Display.
C.Add a call to the method cacheAddMethod after super() in the Init method of the form.
D.Set the Cacheable property on the display method to Yes.
Answer: c

Microsoft   MB6-821   MB6-821   MB6-821   MB6-821

NO.12 How can the best-practice error in a display method be turned off, after it has been investigated
whether record-level security is required?
A.Add the comment://Record-security documented
B.Add the keyword Secure to the method definition.
C.Add the comment://BP deviation documented
D.Add the keyword Ignore to the method definition.
Answer: c

Microsoft   MB6-821 examen   MB6-821   MB6-821 examen

NO.13 How can modifications be moved between a development and a test system?
Choose two that apply.
A.Export the modifications from the development system to a .xpo file and import it into the test system.
B.Copy the .aod and .ald files from the development application file directory to the test application file
directory.
C.Use the application merge tool in the test application, and specify the development application
directory.
D.Run the application upgrade wizard from the development application and specify the test application
file directory.
Answer: ab

certification Microsoft   MB6-821   MB6-821   MB6-821 examen   certification MB6-821   certification MB6-821

NO.14 Where are the online help files stored?
A.In the AOT.
B.In .chm files on the client machine.
C.In .hlp files on the AOS.
D.In .ahp files in the application files directory.
Answer: b

Microsoft   certification MB6-821   MB6-821   MB6-821 examen

NO.15 Which method on RunBase class does the following statement describe?
"This method receives a container as a parameter and restores the type specific variables of the class"
A.initValue
B.main
C.unpack
D.getFromDialog
Answer: c

certification Microsoft   MB6-821   certification MB6-821   MB6-821 examen   MB6-821

NO.16 Isaac, the Systems Developer, needs to write X++ code to iterate through the elements in a Map
object. What class(es) can he use to do this?
Choose two that apply.
A.MapEnumerator
B.MapIterator
C.Map
D.ListIterator
Answer: ab

Microsoft examen   MB6-821   certification MB6-821   MB6-821

NO.17 Isaac, the Systems Developer, wants to debug code in the class SalesFormLetter when it is called from
the sales order form. What steps must he take to achieve this?
Choose three that apply.
A.Install the debugger on the client.
B.Allow debugging to be executed on the AOS.
C.Open the debugger from the Tools menu before the code is executed.
D.Set a breakpoint in the code.
Answer: abd

Microsoft   MB6-821   MB6-821   MB6-821

NO.18 Suppose you have a handle to a temporary table. How do you make this visible in a form with the
temporary table as data source?
A.Loop through the data in the temporary table and copy each record to the data source using .insert().
B.The data will be visible without any manipulation as the handle and data source share the same table
definition.
C.Call the method .loadTmpData() on the data source and specify the handle to the temporary data.
D.Redirect the data source to use the same file as the handle by calling the method .setTmpData().
Answer: d

Microsoft   MB6-821   MB6-821 examen

NO.19 Where is the entire table cache located?
A.It will be present on the client to reduce response time when browsing the data in a grid.
B.It will be present on the server to make the cached data available for all clients connected.
C.It will be present on a dedicated cache server to support clustering of multiple AOS servers.
D.It will be present on the database server as this will reduce the internal disk I/O and improve scalability.
Answer: b

Microsoft   MB6-821 examen   MB6-821   MB6-821 examen   MB6-821   MB6-821

NO.20 Which of the following are valid application object classes?
Choose three that apply.
A.Form
B.FormDesign
C.FormQueryDataSource
D.FormRun
Answer: abd

certification Microsoft   MB6-821   MB6-821 examen   MB6-821 examen   MB6-821

NO.21 What is the purpose of the RunBase framework?
A.It defines a common structure for all reports in Microsoft Dynamics AX.
B.It defines a common structure for all access rights in Microsoft Dynamics AX.
C.It defines a common structure for all data manipulations in Microsoft Dynamics AX.
D.It defines a common structure for all forms in Microsoft Dynamics AX.
Answer: c

Microsoft   certification MB6-821   MB6-821 examen

NO.22 Which select statement is identical to the Query object produced by the following block of code?
Query q;
QueryBuildDataSource qbDS;
QueryBuildRange qbR;
;
q = new Query();
qbDS = q.addDataSource(tableNum(InventTrans));
qbDS.addSelectionField(fieldNum(InventTrans,Qty),SelectionField::Sum);
qbDS.orderMode(OrderMode::GroupBy);
qbR = qbDS.addRange(fieldNum(InventTrans, ItemId)).value(SysQuery::value(""OL-2500""));
qbDS = qbDS.addDataSource(tableNum(InventDim));
qbDS.orderMode(OrderMode::GroupBy);
qbDS.addSortField(fieldNum(InventDim, InventBatchId));
qbDS.relations(true);
A.while select sum(qty) from inventTranswhere inventTrans.ItemId ==OL-2500join inventDimgroup by
inventBatchIdwhere inventDim.InventDimId == inventTrans.InventDimId
B.while select inventTranswhere inventTrans.ItemId ==OL-2500join inventDimgroup by
inventBatchIdwhere inventDim.InventDimId == inventTrans.InventDimId
C.select sum(qty) from inventDimgroup by inventBatchIdjoin inventTranswhere inventTrans.InventDimId
== inventDim.InventDimId&& inventTrans.ItemId ==OL-2500
D.while select sum(qty) from inventDimgroup by inventBatchIdjoin inventTranswhere
inventTrans.InventDimId == inventDim.InventDimId&& inventTrans.ItemId ==OL-2500
Answer: a

Microsoft   certification MB6-821   certification MB6-821   certification MB6-821

NO.23 Which of the following is a difference between the two classes: RecordSortedList and
RecordInsertList?
A.RecordInsertList lacks the sort order features that are available in RecordSortedList.
B.RecordSortedList lacks the sort order features that are available in RecordInsertList.
C.RecordInsertList cannot insert multiple records into the database in one trip.
D.RecordSortedList cannot insert multiple records into the database in one trip.
Answer: a

Microsoft examen   MB6-821   MB6-821   MB6-821   MB6-821 examen

NO.24 Parm tables use a ParmId value to uniquely identify each update. How is the ParmId value created?
A.It is a sequential number taken from the Parm ID number sequence set up on the Administration
parameters.
B.It is a sequential number taken from the System ID number sequence set up on the Company Info
table.
C.It is a GUID created using the newguid() function.
D.It is a GUID created using the WinAPI::createGUID() function.
Answer: b

Microsoft   MB6-821 examen   MB6-821   certification MB6-821   MB6-821 examen   MB6-821

NO.25 What are the main journals in Microsoft Dynamics AX?
Choose three that apply.
A.Ledger
B.Inventory
C.Project
D.Trade
Answer: abc

Microsoft examen   MB6-821   certification MB6-821   certification MB6-821

NO.26 Which runtime class instances exist for a running report with a data source?
Choose two that apply.
A.ReportDesignSpecs
B.QuerySelect
C.QueryRun
D.ReportRun
Answer: cd

Microsoft examen   MB6-821   MB6-821   MB6-821   MB6-821 examen

NO.27 What is the advantage of using placeholders when retrieving data from the database?
A.It reduces the time a record is locked and improve scalability.
B.It makes the optimal access plan for each query as all information is available for the database, when
the access plan is decided.
C.It reduces the CPU usage on the database server as the access plan can be reused.
D.It ensures that all the necessary data are retrieved when specifying a field list.
Answer: c

Microsoft examen   MB6-821   certification MB6-821   MB6-821

NO.28 Isaac, the Systems Developer has moved the axCUS.aod and axCONen-us.ald files from the
development application directory to the test application directory. What must he also do to ensure the
labels are updated correctly?
A.Recompile the application.
B.Synchronize the database.
C.Delete the axCONen-us.ali file.
D.Synchronize the labels.
Answer: c

Microsoft examen   MB6-821   MB6-821   MB6-821

NO.29 When writing a direct SQL statement, what would be the correct syntax to execute a statement and tell
the Code-Access Security layer that it is safe?
A.new
SqlStatementExecutePermission(sqlString).secure();stmt.executeQuery(sqlString);CodeAccessPermissi
on::revertSecure();
B.new
CodeAccessPermission(sqlString).assert();stmt.executeQuery(sqlString);CodeAccessPermission::revert
Assert();
C.new
SqlStatementExecutePermission(sqlString).assert();stmt.executeQuery(sqlString);SqlStatementExecute
Permission::revertAssert();
D.new
SqlStatementExecutePermission(sqlString).assert();stmt.executeQuery(sqlString);odeAccessPermission:
:revertAssert();
Answer: d

Microsoft   MB6-821   MB6-821 examen   MB6-821

NO.30 The following code creates an ODBC connection to an external database. Which block of code is valid
and can be inserted into the /*insert answer here*/ line?
If (odbcConnection)
{
sql ="SELECT * FROM MYTABLE WHERE FIELD =" + criteria + " ORDER BY FIELD1,FIELD2 ASC"
perm = new SqlStatementExecutePermission(sql);
perm.assert();
statement = odbcConnection.createStatement();
resultSet = statement.executeQuery(sql);
/*insert answer here*/
}
A.while (resultSet.next()){print resultSet.get(4);print
resultSet.get(3);}resultSet.close();statement.close();pause;
B.while (resultSet.next()){print resultSet.get(1);print resultSet.get(3);}pause;
C.while (resultSet.next()){print resultSet.getString(2);print resultSet.getString(1);}resultSet.close();pause;
D.while (resultSet.next()){print resultSet.getString(1);print resultSet.getString(3);}pause;
Answer: d

certification Microsoft   MB6-821 examen   certification MB6-821

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

Microsoft MB7-517 examen pratique questions et réponses

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Microsoft MB7-517, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

Pass4Test est un bon site d'offrir la facilité aux candidats de test Microsoft MB7-517. Selon les anciens test, l'outil de formation Microsoft MB7-517 est bien proche de test réel.

Participer au test Microsoft MB7-517 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Microsoft MB7-517 symbole bien la professionnalité d'un travailleur dans cette industrie.

Si vous vous inscriez le test Microsoft MB7-517, vous devez choisir une bonne Q&A. Le test Microsoft MB7-517 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

Code d'Examen: MB7-517
Nom d'Examen: Microsoft (NAV 5.0 Installation and Configuration)
Questions et réponses: 92 Q&As

Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Microsoft MB7-517 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Microsoft MB7-517.

MB7-517 Démo gratuit à télécharger: http://www.pass4test.fr/MB7-517.html

NO.1 As the IT Engineer you need to locate an end-user's setup file so that you can move it to a
shared network directory. Where do you first look for the ZUP file?
A.C:\Documets and Settings\User Name\Application Data
B.C:\Program Files\Microsoft\Dynamics NAV
C.C:\Program Files\Microsoft\Dynamics
D.C:\Documents and Settings\User Name\Dynamics NAV
Correct:A

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

NO.2 As the Microsoft Dynamics NAV System Implementer you are in a discussion with an
inexperienced Microsoft Dynamics NAV salesperson who asks which database server options are
available in the Microsoft Dynamics NAV. What do you tell the salesperson? Choose the 3 that
apply.
A.Oracle 9.0
B.Microsoft SQL Server 2000
C.Microsoft Dynamics NAV Database Server
D.Microsoft SQL Server 2005
Correct:B C D

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

NO.3 You are a Microsoft Dynamics NAV end-user. The application is running slowly so you ask the
consultant's advice on what to do. The consultant recommends that you monitor the performance
of the application and recommends the most important tool for performance monitoring. What
tool does the consultant recommend?
A.The application monitor
B.The server monitor
C.The client monitor
D.Time measurements
Correct:C

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

NO.4 You are the IT Engineer at a large corporation. An end-user complains that he ran out of room on
his computer while loading his MP3 collection so he uninstalled the Microsoft Dynamics NAV
client. Later he felt bad about this and decided to reload the client. Even though he had removed
his MP3 collection from the system, he was still unable to reinstall Microsoft Dynamics NAV. You
explain that when the user uninstalled the client it did not remove any of the following
components.
A.All files related to Microsoft Dynamics NAV
B.Code Units and XML Ports
C.Licenses, Databases and Database backups
D.Reports, Invoices and Statements
Correct:C

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

NO.5 Under what conditions must you enter user-credentials when opening a specific database?
A.You must enter an ID and password regardless of the Authentication method you select (Database
server authentication or Windows authentication).
B.You can open and work in more than one company at a time.
C.You must enter an ID and password only if using the Windows Authentication method.
D.You must enter an ID and password only if using the Database Authentication method.
Correct:D

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

NO.6 You are an IT Engineer new to Microsoft Dynamics NAV. In your conversations with the System
Implementer you have discussed the Architecture of the application. Based on your discussions,
how do you describe the role of client? Choose the 3 that apply.
A.Renders the User interface
B.Executes all the business logic
C.Controls access to the data through locking
D.Connects directly to a standard database file without going through the server
Correct:A B D

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

NO.7 You are an IT Engineer, have almost finished doing a client install and realize you are installing
on the wrong computer. You attempt to cancel the installation. What happens to the portions of
the program already installed?
A.Nothing, you cannot stop the installation process once it begins.
B.The installation process will stop but the installed portions stay in the program folders in case you
reinstall at a later time.
C.The installed files are moved to the temporary folder so they can be accessed in case of another
installation attempt.
D.Microsoft Installer will perform a rollback and restore the computer to the state it was in before the
installation began.
Correct:D

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

NO.8 You are a Microsoft Dynamics NAV Implementation Consultant doing an installation at a small
company with only one computer. Which type of installation is recommended for a Microsoft
Dynamics NAV single user workstation?
A.Minimum
B.Maximum
C.Complete
D.Typical
Correct:C

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

NO.9 You are the System Implementer and are discussing the differences between the SQL Server
Option and the Dynamics NAV database. What do you communicate as the main difference
between the database platforms? Choose the 2 that apply.
A.The User Interface
B.The available backup facilities
C.The logon process
D.The way that SIFT works
Correct:B D

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

NO.10 You are the System Implementer and are discussing the Object Level Security of the Microsoft
Dynamics NAV Security System. You tell the IT Engineer that the Security System divides the
database into nine objects. Which object is used to present the data? Choose the 2 that apply.
A.Report
B.Form
C.Table data
D.Data port
Correct:A B

Microsoft   certification MB7-517   MB7-517   MB7-517   MB7-517

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Microsoft MB7-517 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Microsoft MB7-517 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Microsoft MB7-517 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

Les meilleures Microsoft MB6-817 examen pratique questions et réponses

Le test certification Microsoft MB6-817 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Microsoft MB6-817 puisse augmenter la compétition dans ce marché.

Passer le test Microsoft MB6-817, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification Microsoft MB6-817. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification Microsoft MB6-817.

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Microsoft MB6-817 dans Pass4Test pour se former avant le test Microsoft MB6-817.

La Q&A Microsoft MB6-817 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Microsoft MB6-817.

Code d'Examen: MB6-817
Nom d'Examen: Microsoft (AX 2009 Trade and Logistics)
Questions et réponses: 170 Q&As

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Microsoft MB6-817. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de MB6-817, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Le produit de Pass4Test peut assurer les candidats à réussir le test Microsoft MB6-817 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

MB6-817 Démo gratuit à télécharger: http://www.pass4test.fr/MB6-817.html

NO.1 How can you set up a quality order to be generated automatically after you post a purchase
order picking list for an item?
A.Select the Create quality order automatically check box in Inventory management parameters.
B.Define rules in the Quality associations form.
C.When setting up posting profiles, set the Quality order field to Automatic.
D.When posting the picking list, select the Create quality order check box.
Correct:B

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.2 You are a new order processor in the Contoso company. You must enter a new sales order into
the system. However, you are not sure that all the data is correct. Therefore, you would like a more
experienced Order Processor to check it before confirming the order. How can you handle this in
Microsoft Dynamics AX 2009?
A.Create a sales order of the type Journal.
B.Create a sales order of the type Subscription.
C.Create a Blanket order.
D.Create a sales quotation.
Correct:A

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.3 If warehouse is specified as the primary stocking dimension, and warehouse is specified on a
sales order line, how does this influence automatic reservation?
A.A reservation is made against the dimension with the lowest alphanumeric ID.
B.Items are reserved only at the warehouse specified.
C.Items are reserved according to the LIFO principle.
D.Items are reserved according to the FIFO principle.
Correct:B

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.4 You are an order processor in the Contoso company. You want to validate an order entry setup
for your best customers. It must be valid for all sites on every workday, at 4 p.m. How can you
achieve this?
A.Select the All sites and All order group check box in the Activate order entry deadline combinations form.
B.Create a new entry order deadline group and approve it.
C.Activate assign an order entry deadline group to a customer.
D.Create a group, activate the combination, and set up the combination with the weekdays and time.
Correct:D

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.5 The item Plasma Television Model 01 is set up with the following specifications: In the batch
number group assigned to the item, the allocation method is set up as follows: The Only for
inventory transactions check box is selected, the On physical update check box is selected, and
10 is specified in the Per qty. field.The items dimension group has batch number activation. When
a purchase order for 200 Plasma Television Model 01 is posted, when are the batch numbers
allocated to the items,and how many inventory transactions are made?
A.The batch numbers are allocated on receipt list update and 20 transactions are made.
B.The batch numbers are allocated on receipt list update and 200 transactions are made.
C.The batch numbers are allocated on packing slip update and 20 transactions are made.
D.The batch numbers are allocated on packing slip update and 200 transactions are made.
Correct:C

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.6 The item 9004 is a high-risk item. The Contoso company must be able to trace each of these
items back to purchase and forward to sales if it becomes necessary to recall the items. Which of
the following options do you choose to ensure this full traceability?
A.Set up a unique inventory model group for the item.
B.Manually allocate unique serial numbers to the items on issue.
C.Assign a serial number group to the item that allocates unique serial numbers to each item on receipt.
D.Set up the item inventory model group to automatically assign unique Lot IDs to each item.
Correct:C

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.7 A serialized item belongs to an inventory model group that has the Picking requirement
parameter selected. The Blank issue check box is selected in the item dimensiongroup. How does
this influence the picking process? Choose the 2 that apply.
A.Serial numbers must be specified before a packing slip update, as the settings in the inventory model
group overrule the settings in the dimension group.
B.The sales order cannot be invoice updated without specifying serial numbers.
C.Order lines can be picked and invoiced without specifying serial numbers for the items.
D.Picking list registration must be performed.
Correct:C D

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.8 What is the Item arrival functionality used for in Microsoft Dynamics AX 2009?
A.For estimating and managing item arrival alerts
B.For viewing expected receipts and to start the arrival processing
C.For registering items that are delivered to the transfer warehouse
D.For checking that ordered items physically arrived to the quarantine warehouse
Correct:B

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.9 Which of the following must be set up before creating transfer orders in Microsoft Dynamics
AX 2009? Choose the 2 that apply.
A.The transport time must be created and set up.
B.The transit warehouse must be created.
C.The To warehouse must have a transit warehouse attached.
D.The From warehouse must have a transit warehouse attached.
Correct:B D

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.10 If you want a task to be completed within a specific period of time, how can you set this up in a
purchase requisition workflow configuration?
A.Specify the From and To dates in a workflow configuration.
B.Select the Set a time limit for the task check box and specify a time limit.
C.Activate the automatic actions in Accounts payable parameters.
D.Create a separate workflow and define alert rules for the task.
Correct:B

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.11 You are the Materials manager in the Contoso company. You set up item 1007 CRT Television
Model 01. The sales warehouse for this item is warehouse 21. How can you prevent the sales
warehouse from being changed on the sales order line, after the line is created?
A.Disable the warehouse change parameter on the sales order header.
B.In the Default order settings form, specify that the sales warehouse selected for the item is mandatory.
C.Select the Primary stocking check box in the item dimension group.
D.Specify warehouse 21 and select the Mandatory check box in the Create sales order dialog box.
Correct:B

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.12 If the counted quantity of items is more or less than the posted quantity, what happens when
you post the Counting journal?
A.Counting transactions are created and posted for each item counted.
B.Profit and loss transactions are created but not posted.
C.The quantity difference report is generated.
D.The difference in quantity should be manually posted.
Correct:A

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.13 What is the issue status of an inventory transaction, after you ship a transfer order?
A.Shipped
B.Delivered
C.Received
D.Sold
Correct:D

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.14 How can you specify item prices in Microsoft Dynamics AX 2009? Choose the 2 that apply.
A.Automatically, if setup in the inventory parameters.
B.Manually, on the Setup tab of the Customer/Vendor form.
C.Manually, on the Price/Discount tab of the Items form.
D.By using costing versions.
Correct:C D

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.15 You are the Quality assurance manager in the Contoso company. You receive customer
complaints about the screen image quality of the item 1000 LCD Television. How do you initiate
the test task to test the screen image for this item in Microsoft Dynamics AX 2009?
A.Create a Quarantine order from a sales order.
B.Click Functions > Test from a sales order.
C.Create and set up a new problem type.
D.Create a manual quality order.
Correct:D

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.16 Which of the following is not a non-conformance type in the Quality management module of
Microsoft Dynamics AX 2009?
A.Customer
B.Service request
C.Item
D.Production
Correct:C

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.17 Which of the following is not a storage dimension in Microsoft Dynamics AX 2009?
A.Site
B.Batch
C.Pallet ID
D.Size
Correct:D

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.18 Which of the following is not an item dimension in Microsoft Dynamics AX 2009?
A.Color
B.Batch number
C.Size
D.Configuration
Correct:B

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.19 You are a warehouse employee. How can you save your settings for the Arrival overview form to
your computer?
A.Specify a setup name on the Setup tab of the Arrival overview form and select to save the current
settings.
B.Specify a setup name on the Setup tab of the Inventory parameters form and select to save the current
settings.
C.The system does not allow you to save settings for the Arrival overview form on your local machine.
D.Create new or update your current settings, save them, and select your computer in the Apply to field.
Correct:A

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

NO.20 How can you reserve items that are not on hand, but for which purchase orders are created?
A.Automatic reservation should be used.
B.Ordered but not yet received items are always available for reservations.
C.Select the Allow negative quantity check box for the item.
D.Select the Reserve ordered items check box in Inventory parameters.
Correct:D

Microsoft   MB6-817 examen   MB6-817   MB6-817 examen

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Microsoft MB6-817 et passer le test à la première fois.

Pass4Test offre de Microsoft 70-564 matériaux d'essai

Participer au test Microsoft 70-564 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Microsoft 70-564 symbole bien la professionnalité d'un travailleur dans cette industrie.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Microsoft 70-564 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

On peut voir que beaucoup de candidats ratent le test Microsoft 70-564 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Microsoft 70-564 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Microsoft 70-564, Pass4Test peut offrir les Q&As des autres test Certification IT.

L'équipe de Pass4Test rehcerche la Q&A de test certification Microsoft 70-564 en visant le test Microsoft 70-564. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Microsoft 70-564 sans aucune doute.

Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Code d'Examen: 70-564
Nom d'Examen: Microsoft (PRO: Designing and Developing ASP.NET Applications using Microsoft .NET Framework 3.5)
Questions et réponses: 109 Q&As

70-564 Démo gratuit à télécharger: http://www.pass4test.fr/70-564.html

NO.1 Rate your level of proficiency in accessing data and services, including planning vendor-independent
database interactions and leveraging LINQ in data access design.
A. Very high
B. High
C. Moderate
D. Low
E. Very low
Answer: A

Microsoft examen   70-564 examen   70-564 examen

NO.2 You are creating ASP.NET applications by using the .NET Framework 3.5.
You are designing a page that guides users through a troubleshooting process. The page will ask a series
of questions and then conditionally display additional troubleshooting steps based on user responses.
You need to choose the appropriate control to implement the user interface.
Which control should you use?
A. ListView
B. MultiView
C. FormView
D. DetailsView
Answer: B

Microsoft   70-564   70-564

NO.3 Rate your level of proficiency in establishing ASP.NET solution structure, including establishing an
error-handling strategy and manipulating configuration files to change ASP.NET behavior.
A. Very high
B. High
C. Moderate
D. Low
E. Very low
Answer: A

Microsoft   70-564   70-564   70-564   70-564 examen

NO.4 You are creating an ASP.NET application by using the .NET Framework 3.5.
Users access the application by using different operating systems and different browsers.
You plan to incorporate a new control in the application.
You need to ensure that the control meets the following business requirements:
¡¤It can be accessed through the Microsoft Visual Studio .NET 2008 toolbox
¡¤It can operate without any other prerequisite controls
Which type of control should you choose?
A. A user control
B. An ActiveX control
C. A Web Parts control
D. A custom server control
Answer: D

Microsoft examen   70-564 examen   70-564   70-564   certification 70-564   70-564

NO.5 You are creating an ASP.NET application by using the .NET Framework 3.5.
You review the design of an ASP.NET Web form that collects text input.
The Web form design has the following features:
¡¤It uses the singl-file page model that has script blocks which specify the runat="server" attribute.
¡¤It includes a TextBox control
¡¤It includes a LinkButton control to sbmit the Web form.
¡¤It includes a RegularExpressionValidator control that validates the text input
You need to ensure that the Web form functions properly in browsers that have JavaScript support
disabled.
What should you do?
A. Convert the Web form from the single-file page model to the code-behind page model.
B. Replace the TextBox control with an HtmlInputText control.
C. Replace the LinkButton control with an HtmlInputSubmit control.
D. Replace the RegularExpressionValidator control with a custom server-side validation that calls the
Page.SetFocus method if the input does not match the required format.
Answer: C

Microsoft   certification 70-564   70-564   70-564 examen   70-564   certification 70-564

NO.6 You are creating an ASP.NET application by using the .NET Framework 3.5.
You use LINQ to SQL to query a Microsoft SQL Server 2008 database. You need to create a LINQ query
to retrieve information on order and order details.
You need to ensure that the LINQ query executes the following SQL statement:
SELECT Order.OrderID,Order.Description,OrderDetails.UnitPrice
FROM Order JOIN OrderDetails
ON Order.OrderID = OrderDetails.OrderID
Which LINQ query should you use?
A. from order in db.Orders
join details in db.OrderDetails on
order.OrderID equals details.OrderID
select new {
order.OrderID,
order.Description,
details.UnitPrice
};
B. from order in db.Order
join details in db.OrderDetails on
order.OrderID equals details.OrderID into grp
from ord in grp.DefaultIfEmpty()
select new {
order.OrderID,
order.Description,
ord.UnitPrice)
};
C. from order in db.Order
join details in db.OrderDetails on
order.OrderID equals details.OrderID into grp
select new {
order.OrderID,
order.Description,
grp.First().UnitPrice
};
D. from order in db.Orders
join details in db.OrderDetails on
order.OrderID equals details.OrderID into grp
let price = grp.DefaultIfEmpty().First()
select new {
order.OrderID,
order.Description,
price.UnitPrice
};
Answer: A

certification Microsoft   70-564   certification 70-564

NO.7 Rate your level of proficiency in designing and implementing controls, including choosing controls
based on business requirements, designing controls for reusability, and managing state for controls.
A. Very high
B. High
C. Moderate
D. Low
E. Very low
Answer: A

Microsoft examen   70-564   70-564 examen

NO.8 You are creating ASP.NET applications by using the .NET Framework 3.5.
You are designing a page that guides users through a troubleshooting process. The page will ask a series
of questions and then conditionally display additional troubleshooting steps based on user responses.
You need to choose the appropriate control to implement the user interface.
Which control should you use?
A. ListView
B. MultiView
C. FormView
D. DetailsView
Answer: B

certification Microsoft   70-564   70-564   70-564   70-564   certification 70-564

NO.9 You are creating an ASP.NET application by using Microsoft .NET Framework 3.5.
The application is a library application that catalogs subjects and books. The application contains a
DataContext object named Subjects and a related line of business object named Books.
The Subjects DataContext object is queried by using the following LINQ query.
Dim query = _
From subject In Subjects _
Where (subject.Books.All(Function(b) b.Price <= 25)) _
Select subject
You need to find out the results that will be returned from the query.
What is the result of the query?
A. All books that have a price less than or equal to 25
B. All books that have a price greater than or equal to 25
C. All subjects that have the price of the related book less than or equal to 25
D. All subjects that have the price of the related book greater than or equal to 25
Answer: C

Microsoft   70-564   70-564   70-564 examen

NO.10 Rate your level of proficiency in designing the presentation and layout of an application, including
designing complex layout with Master Pages, designing site navigation, planning for various user agents,
and planning Web sites to support globalization.
A. Very high
B. High
C. Moderate
D. Low
E. Very low
Answer: A

Microsoft examen   70-564 examen   70-564

NO.11 How many years of experience do you have in developing web-based appplications by using ASP.NET
technologies in .NET Framework 3.5?
A. I have not done this yet.
B. Less than 6 months
C. 6 months 1 year
D. 1 2 years
E. 2 3 years
F. More than 3 years
Answer: A

Microsoft examen   certification 70-564   70-564   70-564

NO.12 You are creating an ASP.NET application by using the .NET Framework 3.5.
You use LINQ to SQL to query a SQL Server database. You need to create a LINQ query to retrieve
information on order and order details.
You need to ensure that the LINQ query executes the following SQL statement:
SELECT Order.OrderID,Order.Description,OrderDetails.UnitPrice
FROM Order JOIN OrderDetails
ON Order.OrderID = OrderDetails.OrderID
Which LINQ query should you use?
A. From order In db.Orders _
Join details In db.OrderDetails On _
order.OrderID Equals details.OrderID _
Select _
order.OrderID, _
order.Description, _
details.UnitPrice
B. From order In db.Orders _
Group Join details In db.OrderDetails On _
order.OrderID Equals details.OrderID Into grp = Group _
From ord In grp.DefaultIfEmpty() _
Select _
order.OrderID, _
order.Description, _
ord.UnitPrice
C. From order In db.Orders _
Group Join details In db.OrderDetails On _
order.OrderID Equals details.OrderID Into grp = Group _
Select _
order.OrderID, _
order.Description, _
grp.First().UnitPrice
D. From order In db.Orders _
Group Join details In db.OrderDetails On _
order.OrderID Equals details.OrderID Into grp = Group _
Let price = grp.DefaultIfEmpty().First() _
Select _
order.OrderID, _
order.Description, _
price.UnitPrice
Answer: A

Microsoft   70-564   70-564   70-564

NO.13 Rate your level of proficiency in leveraging and extending ASP.NET architecture, including designing
state management strategy, identifying events of the page life cycle, and debugging ASP.NET Web
applications.
A. Very high
B. High
C. Moderate
D. Low
E. Very low
Answer: A

certification Microsoft   70-564   70-564 examen   70-564 examen   certification 70-564

NO.14 You are creating an ASP.NET application by using the .NET Framework 3.5.
Users access the application by using different operating systems and different browsers.
You plan to incorporate a new control in the application.
You need to ensure that the control meets the following business requirements:
¡¤It can be accessed through the Microsoft Visual Studio .NET 2008 toolbox
¡¤It can operate without any other prerequisite controls
Which type of control should you choose?
A. A user control
B. An ActiveX control
C. A Web Parts control
D. A custom server control
Answer: D

certification Microsoft   70-564 examen   certification 70-564   70-564   70-564

NO.15 Rate your level of proficiency in applying security principles in application design, including establishing
security settings in Web.config, identifying vulnerable elements in applications, and ensuring that
sensitive information in applications is protected.
A. Very high
B. High
C. Moderate
D. Low
E. Very low
Answer: A

Microsoft examen   70-564   certification 70-564   70-564 examen   70-564 examen

NO.16 You are creating an ASP.NET application by using the .NET Framework 3.5.
You write the following code:
01.Dim fileDependencyPath As String =
Server.MapPath("\BatchOutput.xml")
02
03 Response.Cache.SetValidUntilExpires(True)
You need to ensure that all sessions display the most recent data when a batch process updates the
\BatchOutput.xml file.
What code fragment should you insert at line 02?
A. Response.AddCacheItemDependency(fileDependencyPath)
Response.Cache.SetCacheability(HttpCacheability.Public)
B. Response.AddFileDependency(fileDependencyPath)
Response.Cache.SetCacheability(HttpCacheability.Public)
C. Dim httpcache As HttpCacheability = New HttpCacheability()
Response.Cache.SetCacheability(httpcache, fileDependencyPath)
D. Response.Cache.SetETag(fileDependencyPath)
Response.Cache.SetCacheability(HttpCacheability.Public)
Answer: B

Microsoft examen   70-564   70-564   certification 70-564   70-564   70-564 examen

NO.17 How many years of experience do you have in developing web-based applications by using ASP.NET
technologies in any version of .NET Framework?
A. I have not done this yet.
B. Less than 6 months
C. 6 months 1 year
D. 1 2 years
E. 2 3 years
F. More than 3 years
Answer: A

Microsoft   70-564 examen   certification 70-564   70-564

NO.18 You are creating an ASP.NET application by using the .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 string fileDependencyPath =
Server.MapPath("C:\\BatchOutput.xml");
02
03 Response.Cache.SetValidUntilExpires(true);
You need to ensure that all sessions display the most recent data when a batch process updates the
C:\BatchOutput.xml file.
Which code segment should you insert at line 02?
A. Response.AddCacheItemDependency(fileDependencyPath);
Response.Cache.SetCacheability(HttpCacheability.Public);
B. Response.AddFileDependency(fileDependencyPath);
Response.Cache.SetCacheability(HttpCacheability.Public);
C. HttpCacheability httpcache = new HttpCacheability();
Response.Cache.SetCacheability(httpcache, fileDependencyPath);
D. Response.Cache.SetETag(fileDependencyPath);
Response.Cache.SetCacheability(HttpCacheability.Public);
Answer: B

certification Microsoft   70-564   70-564   70-564 examen

NO.19 You are creating an ASP.NET application by using the .NET Framework 3.5.
You review the design of an ASP.NET Web form that collects text input.
The Web form design has the following features:
¡¤It uses the singl-file page model that has script blocks which specify the runat="server" attribute.
¡¤It includes a TextBox control
¡¤It includes a LinkButton control to submit the Web form
¡¤Itincludes a RegularExpressionValidator control that validates the text input.
You need to ensure that the Web form functions properly in browsers that have JavaScript support
disabled.
What should you do?
A. Convert the Web form from the single-file page model to the code-behind page model.
B. Replace the TextBox control with an HtmlInputText control.
C. Replace the LinkButton control with an HtmlInputSubmit control.
D. Replace the RegularExpressionValidator control with a custom server-side validation that calls the
Page.SetFocus method if the input does not match the required format.
Answer: C

certification Microsoft   70-564 examen   70-564 examen   70-564

NO.20 You are creating an ASP.NET application by using Microsoft .NET Framework 3.5.
The application is a library application that catalogs subjects and books. The application contains a
DataContext object named Subjects and a related line of business object named Books.
The Subjects DataContext object is queried by using the following LINQ query.
var query =
from subject in Subjects
where subject.Books.All(b => b.Price <= 25)
select subject;
You need to find out the results that will be returned from the query.
What is the result of the query?
A. All books that have a price less than or equal to 25
B. All books that have a price greater than or equal to 25
C. All subjects that have the price of the related book less than or equal to 25
D. All subjects that have the price of the related book greater than or equal to 25
Answer: C

Microsoft   70-564   70-564 examen   certification 70-564

Pass4Test est un catalyseur de votre succès de test Microsoft 70-564. En visant la Certification de Microsoft, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Microsoft 70-564, la Q&A Microsoft 70-564 est un bon choix pour vous.

Pass4Test offre une formation sur IBM A2040-928 matériaux examen

Choisir le Pass4Test peut vous aider à réussir 100% le test IBM A2040-928 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification IBM A2040-928, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test IBM A2040-928.

Code d'Examen: A2040-928
Nom d'Examen: IBM (Assessment: Developing Websites Using IBM Web Content Manager 8.0 )
Questions et réponses: 91 Q&As

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test IBM A2040-928.

Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test IBM A2040-928 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test IBM A2040-928 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A IBM A2040-928 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test IBM A2040-928 plus facilement avec la Q&A de Pass4Test.

On doit faire un bon choix pour passer le test IBM A2040-928. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification IBM A2040-928 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

A2040-928 Démo gratuit à télécharger: http://www.pass4test.fr/A2040-928.html

NO.1 Priscilla has been tasked to configure an authoring environment. One requirement is to
automatically append a wildcard character to the end of search terms when entered in the basic
search field. How does she configure this action?
A. Within the IBM WebSphere Portal administration console, Priscilla must edit the IBM Web
Content Manager WCMConfigService service andmodify the value of
wcm.authoringui.simplesearch.addstar to true.
B. Within the WebSphere Portal administration console, Priscilla must edit the Web Content
Manager WCMConfigService service and modify thevalue of
wcm.authoringui.simplesearch.appendstar to true.
C. Within the IBM WebSphere Integrated Solutions console, Priscilla must edit the Web Content
Manager WCMConfigService service and modifythe value of wcm.authoringui.simplesearch.addstar
to true.
D. Within the WebSphere Integrated Solutions console, Priscilla must edit the Web Content
Manager WCMConfigService service and modify thevalue of
wcm.authoringui.simplesearch.appendstar to true.
Answer: C

IBM   A2040-928   A2040-928

NO.2 Tony has created the following categories within IBM Web Content Manager: Article >
Practice
Management > Tech Article > Practice Management > Finance He now wants to create a menu that
returns results for all content items that use the News authoring template and all Categories under
Article > Practice Management.
Which of the following examples would allow him to accomplish this task?
A. 1. In Menu Criteria, Tony selects the Authoring Templates and Categories check boxes.
2. In the Authoring Templates section, Tony clicks the Add Authoring Template button and selects
the
News authoring template.
3. In the Categories section, Tony clicks the Include ancestors check box and then clicks the Add
Categories section and selects Article >Practice Management.
B. 1. In Menu Criteria, Tony selects the Authoring Templates and Categories check boxes.
2. In the Authoring Templates section, Tony clicks the Add Authoring Template button and selects
the
News authoring template.
3. In the Categories section, Tony clicks the Include descendents check box and then clicks the Add
Categories section and selects Article >Practice Management.
C. 1. In Menu Criteria, Tony selects the Authoring Templates and Categories check boxes.
2. In the Authoring Templates section, Tony clicks the Add Authoring Template button and selects
the
News authoring template.
3. In the Categories section, Tony clicks the Include ancestors check box and then clicks the Add
Categories section and selects Article >Practice Management > Tech and Article > Practice
Management > Finance.
D. 1. In Menu Criteria, Tony selects the Authoring Templates and Categories check boxes.
2. In the Authoring Templates section, Tony clicks the Add Authoring Template button and selects
the News authoring template.
3. In the "Categories" section, Tony clicks the Results must match all categories check box and then
clicks
the Add Categories section andselects Article > Practice Management > Tech and Article > Practice
Management > Finance.
Answer: B

IBM examen   A2040-928 examen   certification A2040-928   A2040-928   A2040-928

NO.3 For draft items, each of the characteristics are true, except which one?
A. Cancelling a draft is essentially the same as deleting a draft because all the changes made to the
item
are discarded.
B. For draft items in a project that are ready to be published, the draft remains in a pending state
until all
items in the project are ready to bepublished.
C. Draft items are only displayed in the Authoring portlet and are not rendered within the published
website.
D. Even if a published item has more than one draft, the Manage Drafts button is displayed only on
the
published version of the item.
Answer: D

IBM   A2040-928   A2040-928   A2040-928 examen

NO.4 The following statements about mapping site areas, authoring templates and presentation
templates are all true, except:
A. Template maps assigned in site areas will override those set in authoring templates.
B. Two items using different authoring templates can be displayed using the same presentation
template
if both authoring templates are mappedto the same presentation template.
C. The presentation template used by each item will be determined by the authoring template the
item
used, and the location of the item in the siteframework.
D. A content item can be displayed using two different presentation templates. The web content
library is
configured to allow this.
Answer: D

IBM   A2040-928   A2040-928   certification A2040-928

NO.5 Abi is a developer. The HR department wants to create job postings that are made available on
both the company intranet and public websites. Because the two sites look different, the postings
need to have different visual representations on the each of the sites.
Which one of the following statements allows her to accomplish this task?
A. Create different sets of presentation templates and authoring templates for each site area.
B. Create different presentation templates and configure each site area to use the appropriate
presentation template.
C. Create different authoring templates and configure each site area to use the appropriate
authoring
template.
D. Create different HTML components and configure each site area to use the appropriate HTML
components.
Answer: B

IBM   A2040-928   A2040-928 examen

NO.6 Kellan wants to create a Breadcrumbs Navigator. To what should he set the start type?
A. Selected
B. Current Site Area
C. Current Top Level Site Area
D. Current Content
Answer: B

IBM   A2040-928   A2040-928   A2040-928

NO.7 The AT Printer Corp is a manufacturer of computer printers. They are building a new website
using IBM Web Content Manager. The site contains pages that describes each of their product lines.
When content creators are creating a product content item, they are required to include one of five
preformatted company slogans as a part of the content.
Which of the following actions can Jim, a developer, do to facilitate this requirement easily?
A. Jim creates an authoring template and adds all five slogans as HTML components to the
authoring
template. The HTML components are thenreferenced in an Option Selection element on the
authoring
template.
B. Jim first creates an Option Selection component in the Component library with all five slogans.
Jim then
adds this Option Selection componentto the authoring template using Manage Elements.
C. Jim gives content creators the Contributor role on the authoring template. Content Creators can
then
use Manage Elements to add a new fieldto each content item for the slogan.
D. Jim first creates five HTML components in the Component library; one for each slogan. Jim can
add a
Component Reference element to theauthoring template.
Answer: D

IBM examen   certification A2040-928   A2040-928 examen   A2040-928

NO.8 A content item named "News List" has been created in the "News" Site Area, which also
contains other news related content items. The "News List" content item uses a menu component
named "News Menu" to display a listing of content items in the "News" Site Area. Since the "New
List" content item also exists within this site, how can the content author prevent the "News List"
content item from being displayed in the menu list?
A. Leave the "current content" field in the menu design properties section of the menu component
empty
so no output will be rendered.
B. Enable the "Exclude current content from results" option in the menu component.
C. Adjust the sort order to "ascending by type" and choose to render the menu list at the second
content
item.
D. Adjust the sort order to "descending by type" and choose to render the menu list at the second
content
item.
Answer: B

IBM   A2040-928   A2040-928 examen   A2040-928

NO.9 An Authoring Tool component can be added to any of the technical assets listed, except for
which option?
A. Menu component
B. Presentation template
C. Navigator component
D. Authoring template
Answer: D

IBM   A2040-928   A2040-928   certification A2040-928   certification A2040-928   A2040-928 examen

NO.10 A content administrator would like to customize the initial interface of the Authoring Portlet
so that content authors are presented with just two simplified options (create a news article and
view content drafts).
Which one of the following options best describes how the content administrator can achieve this?
A. Go into the authoring portlet configuration mode, expand the user interface section, and
configure the required settings.
B. Create a custom launch page that uses remote action URLs.
C. Go into the authoring portlet, edit shared settings mode, expand the user interface section, and
configure the required settings.
D. Customize the initial interface by modifying the portlet's default.jsp file.
Answer: B

IBM examen   A2040-928 examen   A2040-928 examen   certification A2040-928

NO.11 Sadie has created a menu that typically returns 50-100 content items. She does not want to
show the entire list at one time; instead she wants to show 10 items at a time with the ability to
page-through the matches in groups of 10.
How can Sadie accomplish this task?
A. Create a Page Navigation component and embed the component in the menu's footer using a
[PageInfo] tag.
B. Create a Page Navigation component and embed the component in the menu's footer using a
[Component] tag.
C. Create a Page Navigation component and embed the component in the presentation template
that renders the menu using a [Component] tag.
D. Check the Show items in Pages option in the menu. Select the appropriate number of items to be
shown per page.
Answer: B

IBM examen   certification A2040-928   certification A2040-928   A2040-928   A2040-928

NO.12 Tom wants to write out a fully qualified URL to a content item being viewed through a portal.
Which one of the following tags allows him to retrieve the protocol, host name, and port
information for the URL?
A. [pathcmpnt tag="base"/]
B. [pathcmpnt tag="noprefixbase"/]
C. [path tag="base"/]
D. [path tag="noprefixbase"/]
Answer: B

IBM   A2040-928   A2040-928   certification A2040-928   A2040-928

NO.13 Jennifer is a developer creating a new authoring template to allow content creators to create
job postings. One of the fields that needs to show on the authoring template is Salary.
Which of the following element types is appropriate for this type of information?
A. Text
B. Decimal
C. Number
D. Currency
Answer: C

IBM examen   certification A2040-928   certification A2040-928   A2040-928   A2040-928

NO.14 Adam works as the IBM Web Content Manager administrator within the Finance department.
One of
the authoring templates within his library is called Results. Within this authoring template, his
content
authors enter how many products, such as teddy bears, have been purchased. Currently all fields
within
this authoring template have been created as text fields.
How can Adam ensure that his content authors enter whole numbers?
A. Adam must change the fields within the Results authoring template from Text to Number.
B. Adam must change the fields within the Results authoring template from Text to Currency.
C. Adam must change the fields within the Results authoring template from Text to Currency. Within
the
field properties, he should set theminimum and maximum values.
D. Adam must change the fields within the Results authoring template from Text to Numbers.
Within the
field properties, he should select theWhole Numbers Only radio button.
Answer: D

IBM examen   A2040-928 examen   certification A2040-928

NO.15 Wesley is a content developer, and Lauren is a content creator. Lauren is entering products
into the IBM Web Content Manager website. One requirement for the site is that each product
content item can optionally have a product picture. What can Wesley and Lauren do to facilitate this
requirement?
A. Lauren adds an image field to each content item and uploads the appropriate product image to
each content item. Wesley references theImage component in the presentation template.
B. Lauren creates an Image component in the Component library for each product image. Wesley
references the library components in thepresentation template.
C. Wesley adds an Image component to the product's site area. Lauren adds each product image to
the site area as new content items arecreated. Wesley references the site area images in the
presentation template.
D. Wesley adds an Image element to the authoring template. Lauren adds an image to each content
item using the Image element. Wesleyreferences the Image element in the presentation template.
Answer: D

IBM   certification A2040-928   A2040-928   A2040-928 examen

Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.