Citrix 1Y0-350, de formation et d'essai

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

Finalement, la Q&A Citrix 1Y0-350 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Citrix 1Y0-350 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Citrix, vous aurez un meilleur salaire et une plus grande space à se développer.

Code d'Examen: 1Y0-350
Nom d'Examen: Citrix (Citrix NetScaler 10 Essentials and Networking)
Questions et réponses: 126 Q&As

Si vous traviallez dur encore pour préparer le test de Citrix 1Y0-350 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Citrix 1Y0-350.

Choisissez le Pass4Test, choisissez le succès de test Citrix 1Y0-350. Bonne chance à vous.

Si vous faites toujours la lutte contre le test Citrix 1Y0-350, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Citrix 1Y0-350. Si vous avez déjà décidé à s'améliorer via Citrix 1Y0-350, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

1Y0-350 Démo gratuit à télécharger: http://www.pass4test.fr/1Y0-350.html

NO.1 A network engineer wants to optimize a published load balanced SSL virtual server for WAN
connection with long delay, high bandwidth with minimal packet drops.
What would the network engineer use to do this type of optimization for the SSL virtual server?
A. SSL policy
B. TCP profile
C. Compression policy
D. Priority queuing policy
Answer: B

Citrix   1Y0-350   1Y0-350 examen   1Y0-350 examen   1Y0-350

NO.2 Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting the services are on an IPv4 network. The engineer has
already enabled IPv6 on the NetScaler.
What does the engineer need to do in order to provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix examen   1Y0-350 examen   certification 1Y0-350   1Y0-350 examen

NO.3 Scenario: For security reasons, the NSIP needs to be configured to only be accessible on
interface 0/1, which is VLAN 300.
The NSIP address is 10.110.4.254 and the subnet mask is 255.255.255.0.
How would the network engineer achieve this configuration?
A. set ns config -nsvlan 300 -ifnum 0/1
B. set ns ip 10.110.4.254 -gui ENABLED -vrID 300
C. add vlan 300 set ns ip 10.110.4.254 -mgmtAccess ENABLED
D. set ns config -IPAddress 10.110.4.254 -netmask 255.255.255.0
Answer: A

Citrix   1Y0-350   1Y0-350 examen   1Y0-350 examen

NO.4 Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces; however, the engineer has been told that the NetScaler must now only use a single
interface for this network. The engineer removes the channel and immediately notices a decrease in
network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix   certification 1Y0-350   1Y0-350 examen   1Y0-350   1Y0-350 examen

NO.5 Scenario: A network engineer created an IPv6 virtual server on the NetScaler. The virtual
server is using a service group with two IPv4 servers bound to it. When testing access to the virtual
server from a client configured with an IPv6 address, he is unable to connect.
What could be the reason for this issue?
A. The NetScaler is disabled for NAT.
B. IPv6 protocol translation is disabled.
C. An IPv6 address on the NetScaler is not bound to the correct VLAN.
D. The NetScaler does not have an INAT rule to convert IPv4 to IPv6 from the back-end servers.
Answer: B

Citrix examen   certification 1Y0-350   1Y0-350   1Y0-350

NO.6 A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix   1Y0-350 examen   1Y0-350 examen

NO.7 Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix   certification 1Y0-350   certification 1Y0-350   certification 1Y0-350

NO.8 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize the number of ARP requests.
Which feature should the network engineer enable to minimize ARP requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix   1Y0-350   certification 1Y0-350   1Y0-350

NO.9 Scenario: The NetScaler is connected to two subnets. The NSIP is 10.2.9.12. The external SNIP
is 10.2.7.3. The MIP for internal access is 10.2.9.3. Web servers, authentication servers and time
servers are on the 10.2.10.0/ 24 network which is available through the
10.2.9.1 router. The external firewall has the 10.2.7.1 address. Traffic bound for Internet clients
should flow through the external firewall.
Which command should be used to set the default route?
A. add route 0.0.0.0 0.0.0.0 10.2.7.1
B. add route 0.0.0.0 0.0.0.0 10.2.9.1
C. add route 10.0.0.0 255.0.0.0 10.2.9.1
D. add route 10.0.0.0 255.0.0.0 10.2.7.1
Answer: A

Citrix examen   1Y0-350   certification 1Y0-350   certification 1Y0-350

NO.10 Scenario: An engineer executes the following commands:
add vlan 2 bind vlan 2 -ifnum 1 / 2 add ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress
10.110.4.200 255.255.255.0
What type of IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

certification Citrix   1Y0-350   1Y0-350

Pass4Test peut offrir nombreux de documentations aux candidats de test Citrix 1Y0-350, et aider les candidats à réussir le test. Les marétiaux visés au test Citrix 1Y0-350 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Citrix 1Y0-350 100%.