I10-002 dernières questions d'examen certification XML Master et réponses publiés

Selon les feedbacks offerts par les candidats, c'est facile à réussir le test XML Master I10-002 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification XML Master I10-002. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test XML Master I10-002, vous aurez une meilleure préparation avec l'aide de Pass4Test.

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test XML Master I10-002 est une bonne examination. Mais c'est difficile à passer le test XML Master I10-002. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

Code d'Examen: I10-002
Nom d'Examen: XML Master (XML Master: Professional V2)
Questions et réponses: 80 Q&As

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel XML Master I10-002 peut vous assurer à réussir 100% le test XML Master I10-002. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Choisissez le Pass4Test, choisissez le succès de test XML Master I10-002. Bonne chance à vous.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test XML Master I10-002. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de XML Master I10-002 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

I10-002 Démo gratuit à télécharger: http://www.pass4test.fr/I10-002.html

NO.1 Push the Exhibit Button to load the referenced "XML document".
[XML Document]
<root><data>lmnop</data></root>
Assume that the "XML Document" is changed to the "Results XML Document." Select which XSLT style
sheet correctly performs the transformation.
Note that the XSLT processor can output transformation results as a document.
[Results XML Document]
<ZZZ><YYY>lmnop</YYY></ZZZ>
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:include href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " //root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:import href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " //root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:include href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:import href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
Answer: A

XML Master   certification I10-002   I10-002   I10-002

NO.2 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<TestML xmlns="urn:xmlmaster:testml">
<record level="1" data="100" />
<record level="2" data="250" />
</TestML>
Choose the XML Schema Document that does not correctly define the structure of the "XML Document".
A. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" tns:testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" tns:record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" tns:recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
B. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
C. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
D. <schema
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml">
<element name="TestML" type="tns:testmlType" />
<complexType name="testmlType">
<sequence>
<element ref="tns:record" maxOccurs="unbounded" />
</sequence>
</complexType>
<element name="record" type="tns:recordType" />
<complexType name="recordType">
<attribute name="level" type="int" />
<attribute name="data" type="int" />
</complexType>
</schema>
Answer: C

XML Master   I10-002 examen   I10-002 examen   I10-002

NO.3 Which of the following describes the most correct call order of the ContentHandler interface methods
when parsing the following "XML Document" using a non-validating SAX parser? This question reflects
line feeds within the XML document.
[XML Document]
<a>
<b>
c
</b>
</a>
A. startDocument - startElement - characters - startElement - characters - characters - characters -
endElement - characters - endElement - endDocument
B. startDocument - startElement - ignorableWhitespace - startElement - ignorableWhitespace -
characters - ignorableWhitespace - endElement - ignorableWhitespace - endElement - endDocument
C. startDocument - startElement - startElement - characters - endElement - endElement - endDocument
D. startDocument - startElement - startElement - characters - characters - endElement - endElement -
endDocumentW
Answer: A

certification XML Master   I10-002 examen   I10-002

NO.4 Push the Exhibit Button to load the referenced "XML Document".
Assume that the character "3" is obtained from the "XML document". Select which XSLT style sheet
correctly performs the transformation. (Multiple answers possible. Select two.)
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[x='1'][y='2'] " />
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[(attribute::x='1') and (text()='3')] " />
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self='3'] " />
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self::*='3'] " />
</xsl:template>
</xsl:stylesheet>
Answer: BD

certification XML Master   certification I10-002   I10-002 examen   I10-002 examen

NO.5 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<root><data>lmnop</data></root>
Assume that the "XML document" is changed to the "Results XML Document." Select which XSLT style
sheet correctly performs the transformation.
Note that the XSLT processor can output transformation results as a document.
[Results XML Document]
<lmnop/>
Or
<lmnop></lmnop>
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="<xsl:value-of select='.'/>"/>
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="{ . }"/>
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="."/>
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:text disable-output-escaping="no"><</xsl:text>
<xsl:value-of select="."/>
<xsl:text disable-output-escaping="no">/></xsl:text>
</xsl:template>
</xsl:stylesheet>
Answer: B

XML Master examen   certification I10-002   I10-002 examen   I10-002

NO.6 Push the Exhibit Button to load the referenced "XML Document 1" and "XML Document 2," and process
XML using "DOM Processing."
Select which of the following is the most appropriate expression of the results under XML 1.0. Line feeds
and/or indents are not reflected in the results.
A. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " >string value</data>
</root2>
B. <root2 xmlns="urn:xmlmaster:EX2">
<data>string value</data>
</root2>
C. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " />
</root2>
D. <root2 xmlns="urn:xmlmaster:EX2">
<data/>
</root2>
Answer: A

XML Master examen   I10-002   I10-002   certification I10-002

NO.7 Push the Exhibit Button to load the referenced "XML Document".
Select which of the following correctly describes the output results of an XSLT transformation of the "XML
Document" using the "XSLT Style Sheet".
Note that the XSLT processor can output transformation results as a document. Line feeds and indents
are not reflected.
A. <record>
<data>100</data>
</record>
B. <record xmlns="urn:xmlmaster:test">
<data>100</data>
</record>
C. <record xmlns="urn:xmlmaster:test">
<data xmlns= "" >100</data>
</record>
D. <record>
<data>100</data>
<data>70</data>
</record>
E. <record xmlns="urn:xmlmaster:test">
<data>100</data>
<data>70</data>
</record>
F. <record xmlns="urn:xmlmaster:test">
<data xmlns= "" >100</data>
<data xmlns= "" >70</data>
</record>
Answer: F

certification XML Master   I10-002 examen   I10-002   I10-002 examen   I10-002   certification I10-002

NO.8 Which of the following correctly describes the DOM (Level 2) Node interface?
A. The Node interface can be used to change the value (nodeValue) of the DOM element node (Element)
B. The Node interface can be used to change the name (nodeName) of the DOM element node (Element)
C. The Node interface can be used to change the value (nodeValue) of the DOM attribute node (Attr)
D. The Node interface can be used to change the name (nodeName) of the DOM attribute node (Attr)
Answer: C

XML Master   I10-002 examen   certification I10-002   certification I10-002

NO.9 Select which of the following correctly describes WSDL. (WSDL 1.1)
A. WSDL assumes SOAP as the message transmission form
B. When WSDL is defined by a combination of style="rpc" and use="encoded", then
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" must be designated
C. When WSDL is defined by a combination of style="rpc" and use="encoded", then the encodingStyle
attribute cannot be designated
D. WSDL may be defined by a combination of style="rpc" and use="literal"
Answer: D

XML Master   I10-002   I10-002 examen   I10-002   I10-002   I10-002

NO.10 What must you write in XSLT style sheet (1) to process the following "XML Document" and obtain the
following "transform results"? Select the correct answer below. Note that "#" indicates a line feed, and "=*"
indicates a tab.
Assume that the XSLT processor can output transformation results as a document.
A. Nothing needs to be written.
B. <xml:space="preserve"/>
C. <xsl:preserve-space elements="content"/>
D. <xsl:strip-space elements="doc body"/>
Answer: D

XML Master   I10-002 examen   I10-002   certification I10-002   I10-002

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A XML Master I10-002. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test XML Master I10-002 sans aucune doute.