Pass4Test vous promet de vous aider à passer le test 3COM 3M0-250, vous pouvez télécharger maintenant les Q&As partielles de test 3COM 3M0-250 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
Pass4Test est un seul site web qui peut offrir toutes les documentations de test 3COM 3M0-250. Ce ne sera pas un problème à réussir le test 3COM 3M0-250 si vous préparez le test avec notre guide d'étude.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification 3COM 3M0-250. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Code d'Examen: 3M0-250
Nom d'Examen: 3COM (3Com Certified Enterprise LAN Post-Sales Expert version 1.0)
Questions et réponses: 50 Q&As
Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test 3COM 3M0-250, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
Avec la version plus nouvelle de Q&A 3COM 3M0-250, réussir le test 3COM 3M0-250 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.
3M0-250 Démo gratuit à télécharger: http://www.pass4test.fr/3M0-250.html
NO.1 You have issued the switch debugging command debugging rip packets from the management terminal,
but you are not receiving any debug output. What is the reason you are not getting any debug output from
the switch?
A.RIP has not been enabled, and therefore there is no debug output
B.Output from the debugging command only goes to the syslog server
C.You forgot to issue the enable debugging command at the System View
D.You forgot to issue the terminal debugging command, directing the output to your management terminal
Answer: D
3COM examen certification 3M0-250 3M0-250 certification 3M0-250
NO.2 Which switch command shows what is installed in the switch and the current operational status?
A.[SW8800-14slot] display device
B.[SW8800-14slot] display system
C.[SW8800-14slot] display startup
D.[SW8800-14slot] display current-configuration
Answer: A
3COM 3M0-250 examen certification 3M0-250 certification 3M0-250 3M0-250 3M0-250 examen
NO.3 Which Switch 5500 model(s) does not support Distributed Resilient Routing (DRR)?
A.Switch 5500-EI
B.Switch 5500-SI
C.Switch 5500G-EI
D.All of the above
Answer: B
3COM 3M0-250 examen certification 3M0-250 3M0-250 examen 3M0-250 examen
NO.4 An IP address must be configured on a switch before it can be managed using Telnet.
A. True
B. False
Answer: A
3COM examen 3M0-250 examen certification 3M0-250
NO.5 Which best defines the mechanism of IEEE 802.1X Network Login?
A.An authenticator requests access to network services; the authentication server enforces authentication
before allowing access to the network and validates the supplicant on behalf of the authenticator
B.A supplicant requests access to network services; the authenticator enforces authentication before
allowing access to the network; the authentication server validates the supplicant on behalf of the
authenticator
C.A supplicant requests access to network services; the authentication server enforces authentication
before allowing access to the network; the authenticator validates the supplicant on behalf of the
authentication server
Answer: B
3COM 3M0-250 3M0-250 3M0-250 certification 3M0-250 3M0-250
NO.6 What is the result of the command boot boot-loader file-url?
A.Reboots the switch using the file-url for the operational code
B.Updates the switch BootROM with the file-url on the system flash
C.Reboots the switch fabric only using the file-url for the operational code
D.Specifies the switch to use file-url for the operational code on the next boot
Answer: D
3COM 3M0-250 examen 3M0-250 examen 3M0-250
NO.7 GARP VLAN Registration Protocol (GVRP) maintains and distributes Virtual LAN (VLAN) registration
information only about the dynamically created VLANs using GARP.
A. True
B. False
Answer: B
certification 3COM 3M0-250 examen certification 3M0-250
NO.8 What is the reason to connect the up port on the bottom Switch 5500 in the stack to the down port of
the top Switch 5500 in the same stack?
A.Reliability - creates a resilient topology
B.Security - prevents an unauthorized user from connecting to the switch stack
C.Performance - creates the 48-Gbps eXpandable Resilient Networking (XRN) Fabric
D.Management - enables Distributed Resilient Routing (DRR) on the Switch 5500-SI
Answer: A
3COM certification 3M0-250 3M0-250 examen 3M0-250 certification 3M0-250
NO.9 You have configured multiple OSPF areas on your network. How do the different OSPF areas
communicate with each other?
A.The Designated Router (DR) uses multicast routing to broadcast advertisements to the other area DRs
B.The Designated Router (DR) connects each OSPF area to the main backbone network and
communicates with the other areas
C.The Area Border Router (ABR) connects each OSPF area to the main backbone network and
communicates with the other areas
D.The Autonomous System Border Router (ASBR) connects each OSPF area to the main backbone
network and communicates with the other areas
Answer: C
certification 3COM certification 3M0-250 3M0-250 examen
NO.10 How does the network administrator configure the up/down Switch 5500-EI/SI ports to operate in fabric
mode?
A.By default, the up/down ports are enabled for fabric mode
B.Execute the command xrn-fabric authentication-mode simple
C.Execute the command resilient-arp enable x/x/x where x/x/x identifies the unit and port number
D.Execute the command fabric-port gigabit x/x/x enable where x/x/x identifies the unit and port number
Answer: D
3COM 3M0-250 3M0-250
NO.11 Which Switch 5500 PWR LED condition indicates the switch is powered-up and operating normally?
A.Off
B.Green
C.Green flashing
D.Solid green when not transmitting user data and flashing green when transmitting user data
Answer: B
3COM certification 3M0-250 certification 3M0-250 3M0-250
NO.12 How would you view the configuration information that is running on a switch?
A.Use the display startup command
B.Use the display version command
C.Use the display saved-configuration command
D.Use the display current-configuration command
Answer: D
3COM examen certification 3M0-250 3M0-250 examen 3M0-250
NO.13 Click on the exhibit button.
Which Switch 7700 command shows all the hardware and software information on the modules (review
the output shown in the exhibit)?
A.[SW7700] display device
B.[SW7700] display version
C.[SW7700] display interfaces
D.[SW7700] display current-configuration
Answer: B
3COM 3M0-250 3M0-250 examen
NO.14 What is the effect of the Simple Network Management Protocol (SNMP) switch command snmp-agent
target-host trap address udp-domain 129.102.149.23 udp-port 5000 params securityname 3comprivate?
A.Configures the switch with a default community string name of 3comprivate
B.Enables the SNMP trap functions on a switch with IP address 129.102.149.23
C.Configures the switch SNMP agent to send traps to the network management station at IP address
129.102.149.23
D.Enables the SNMP trap functions and sets the default community string name of 3compublic on a
switch with IP address 129.102.149.23
Answer: C
certification 3COM 3M0-250 examen certification 3M0-250 3M0-250
NO.15 Which two are functions of Extensible Authentication Protocol (EAP)? (Choose two.)
A.Provides a framework and transport for the exchange of authentication information between the
authenticator and the supplicant
B.Provides encapsulation for the exchange of information between the authenticator and authentication
server
C.Provides the mechanism for locking/unlocking a switch port based on the results of the supplicants
authentication
D.Provides the mechanism for defining what network resources a user may access based on the
authentication information
Answer: AB
3COM examen 3M0-250 certification 3M0-250
NO.16 Which security standard is defined by IEEE 802.1X Network Login?
A.Encryption standard for network authorization
B.Port-based Network Access Control protocol standard
C.Extensible Authentication Protocol (EAP) standard for network authorization
D.Authentication, Authorization and Accounting (AAA) standard for network access
Answer: B
certification 3COM 3M0-250 examen certification 3M0-250 3M0-250
NO.17 How must the MAC Radius Authenticated Device Access (RADA) address be configured on the
Switch 5500?
A.Hexadecimal IP address only
B.Hexadecimal MAC address only
C.Binary or hexadecimal IP or MAC address
D.Binary, decimal or hexadecimal MAC address
Answer: B
3COM certification 3M0-250 certification 3M0-250 3M0-250
NO.18 Which two are general Link Aggregation (LA) configuration rules that must be followed when creating
an LA group? (Choose two.)
A.A member link port can only belong to one LA group
B.Aggregated links are mutually exclusive with roving analysis and mirror ports
C.A port must be configured for resilient links before it can be configured as a member of an LA group
D.LA ports can only be configured if Link Aggregation Control Protocol (LACP) is enabled on the switches
Answer: AB
3COM 3M0-250 certification 3M0-250 3M0-250 3M0-250
NO.19 You have already configured and enabled individual switch ports for IEEE 802.1X Network Login.
What is required for authentication to be activated on the ports?
A.From the System View, enable 802.1X Network Login
B.From the Ethernet Port View, set the port access control mode
C.From the System View, configure the authentication method for 802.1X users
D.From the Ethernet Port View, configure the authentication method, i.e., chap, pap, eap, etc.
Answer: A
3COM 3M0-250 examen 3M0-250
NO.20 Which three are Switch 5500 configuration requirements when creating an eXpandable Resilient
Networking (XRN) Fabric? (Choose three.)
A.All units in the stack must have the same sysname
B.All units in the stack must be running the same software version
C.A mixture of switch models can be used to create a single XRN Fabric
D.Switch 5500-SI/EI up/down ports must be enabled for fabric mode
E.A switch must be initialized after it has been added to an existing XRN Fabric
Answer: ABD
3COM 3M0-250 3M0-250 examen
Pour vous laisser savoir mieux que la Q&A 3COM 3M0-250 produit par Pass4Test est persuadante, le démo de Q&A 3COM 3M0-250 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test 3COM 3M0-250 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
