Vous aurez une assurance 100% à réussir le test Novell 50-682 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
Il demande les connaissances professionnelles pour passer le test Novell 50-682. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Novell 50-682, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Novell 50-682 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Novell 50-682 qui vous amenera le succès du test Novell 50-682, au lieu de traivailler avec peine et sans résultat.
Code d'Examen: 50-682
Nom d'Examen: Novell (Advanced Novell Network Management )
Questions et réponses: 145 Q&As
Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Novell 50-682 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Novell 50-682.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Novell 50-682 peut vous assurer à réussir 100% le test Novell 50-682. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Novell 50-682 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Novell 50-682 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
50-682 Démo gratuit à télécharger: http://www.pass4test.fr/50-682.html
NO.1 .You are working in a pure IP environment and the workstation is not
communicating with the server.
Which are some valid troubleshooting steps that can be executed on the workstation to
help identify the problem? (Choose three)
A. Ping the server.
B. Use TRACERT.
C. Verify that DSTRACE is not running.
D. Use CONFIG to verify that the network board is bound.
E. Verify the workstation IP address with the IPCONFIG command.
F. RUN DSTRACE to verify there are no DS communication issues between the
workstation and server.
Answer: A, B, E
Novell examen certification 50-682 certification 50-682 50-682 examen
NO.2 .DRAG DROP
Listed are the SET parameters used that instruct the server how to respond to an
abend and the description for each SET parameter.
Drag the parameter to the appropriate description.
Answer:
NO.3 .Which utility allows you to type in commands at the server console screen?
A. iMonitor
B. iManager
C. ConsoleOne
D. Server Manager
E. Remote Manager
Answer: E
Novell examen 50-682 50-682 examen 50-682 examen
NO.4 .When does synthetic time occur in an eDirectory tree?
A. When there is no time source in the tree.
B. When a secondary server acts like a time source.
C. When time is not synchronized throughout the network.
D. When an object is modified within the same second from two different sources.
E. When an eDirectory object has a modification time stamp in the future of the current
network time.
Answer: E
certification Novell 50-682 examen certification 50-682 certification 50-682 50-682 examen
NO.5 .Which tool is used to fix problems with an NSS pool that could not be corrected with
other techniques?
A. VCU
B. VERIFY
C. REPAIR
D. REBUILD
E. NSSSCAN
F. POOLREPAIR
Answer: D
Novell 50-682 examen certification 50-682 50-682 certification 50-682
NO.6 You just added a second hard drive to your RAID system. Click the area of the graphic
that redistributes data across all RAID devices, including the new hard drive.
Answer:
Explanation: Click on Restripe
page 6-9 Restriping redistributes data across all Raid devices, including the new hard
drive.
NO.7 .When NCS casts off an isolated slave node, the slave node takes a poison pill and
abends.
Which statement is true regarding the poison pill?
A. The master node sends a poison pill directly to the isolated node.
B. Any of the non-isolated nodes send a poison pill directly to the isolated node.
C. The isolated node recognizes it is not receiving heartbeats from the master node and
then takes the poison pill.
D. The isolated node realizes that its epoch number does not match the other nodes epoch
number and then takes the poison pill.
E. The isolated node reads a special token on the SBD partition that was created by the
other nodes and then takes the poison pill.
Answer: E
Novell 50-682 50-682
NO.8 Which are tools you can use at the server console prompt to help troubleshoot IP
problems? (Choose two)
A. PING
B. TCPCON
C. NETSTAT
D. TRACERT
E. IPCONFIG
Answer: A, B
certification Novell certification 50-682 certification 50-682 50-682 50-682
NO.9 .Which statements are true about the source server when doing a server migration to
NetWare 6? (Choose two)
A. The source server must be running IP.
B. Any NetWare 3.x server and higher can be migrated to NetWare 6.
C. The source server's volumes must be the same size as the destination server's volumes.
D. If the source server is NetWare 4, the volumes must have long name space support
added.
E. The person performing the migration must have the Supervisor right to the source
server's file system.
Answer: D, E
Novell certification 50-682 50-682 50-682 50-682
NO.10 .What are cluster-aware applications for NCS 1.6? (Choose two)
A. iManager
B. ManageWise
C. DHCP Server
D. RealOne player
E. Queue-based printing
Answer: A, C
Novell certification 50-682 50-682 examen
NO.11 When checking the state of a cluster resource, what color will the resource appear as, if it
is unknown?
A. Red
B. Gray
C. Green
D. Yellow
E. Blank (or no color)
Answer: B
Novell 50-682 examen 50-682
NO.12 .When performing a migration to a NetWare 6 server, which are valid statements
regarding copying volumes? (Choose two)
A. The volumes cannot be compressed.
B. The source and destination server's volumes must be NSS.
C. You do not need to copy all of the volumes at the same time.
D. The source and destination server's volume size must be the same.
E. The source and destination server's volume names must be the same.
Answer: C, E
Novell examen 50-682 50-682
NO.13 .You want to modify your NCS environment by changing node assignment to
resource using ConsoleOne.
Which object's properties page allows you to change node assignments?
A. Any node object
B. The cluster object
C. The master node object
D. The Cluster ADMIN object
E. Any cluster-enabled resource or volume object
Answer: B
Novell examen 50-682 50-682 examen
NO.14 Click on the object that will allow you to view start, failover, and failback node
settings.
Answer:
NO.15 .You have setup load and unload scripts for resource in your NCS environment and
have specified a timeout value of 300 seconds for each resource.
What will happen to the resource if it doesn't get through the load script in 300 seconds?
A. It is put into an ALERT state.
B. It is put into an OFFLINE state.
C. It is put into a COMATOSE state.
D. It is put into an UNASSIGNED state.
E. It is put into a QUORUM WAIT state.
Answer: C
Novell certification 50-682 50-682 certification 50-682
NO.16 .An iFolder user has discovered that new files are not being synchronized to his
server, while at the same time changes to existing files are being synchronized.
What is the most likely cause of the problem?
A. The conflict bin is too small.
B. Corrupted file maps are dirmaps.
C. The computer does not have sync rights.
D. The server does not have enough disk space.
Answer: B
certification Novell 50-682 certification 50-682 50-682
NO.17 .Shown are properties of the DACLUSTER object. There are applications in the
cluster that you want to load before others.
Click on the tab that will allow you to specify the order that applications load within
the cluster.
Answer:
NO.18 .If an object is missing a mandatory attribute, how will this object be displayed in
ConsoleOne?
A. As a grayed-out object.
B. As a black-and-white object.
C. As a mark in a circle.
D. As a mar in a square.
E. As two numbers with a dash between them (eg. 9-6).
Answer: C
certification Novell 50-682 certification 50-682 50-682 50-682 examen
NO.19 .You have just completed installing NCS and are now going to create a shared disk
partition.
Which utility is used to create a shared disk partition?
A. iMonitor
B. iManager
C. ConsoleOne
D. Server Manager
E. NWCONFIG.NLM
Answer: C
Novell 50-682 50-682 examen 50-682
NO.20 .There are problems when starting your NetWare 6 server.
Which command helps to identify at which point modules are loading during the server
startup?
A. LIST
B. CONFIG
C. STARTUP
D. MODULES
E. LIST STAGE
Answer: E
Novell 50-682 50-682 examen certification 50-682
NO.21 Which RAID levels can be implemented with NSS? (Choose two)
A. 0
B. 1
C. 2
D. 3
E. 4
F. 5
G. 6
H. 7
Answer: A,B
certification Novell 50-682 50-682 50-682 50-682
NO.22 After a NetWare 6 server migration, you have noticed that device drivers are not
loading. These drivers need to be placed in the directory where SERVER.EXE
resides.
Where can you copy these drivers from?
A. C:\DRIVERS
B. SYS:SYSTEM
C. STS:ETC\DRIVERS
D. SYS:SYSTEM\DRIVERS
E. C:\NWSERVER\DRIVERS
Answer: E
Novell certification 50-682 50-682 certification 50-682 50-682
NO.23 .In order to change the IP address of your NetWare iFolder server, which files must be
manually modified? (Choose four)
A. HTTPD.CONF
B. iFolderClient.exe
C. AUTOEXEC.NCF
D. STOPIFOLDER.NCF
E. STARTIFOLDER.NCF
F. HTTPD_ADDITIONS_MW.CONF
Answer: A, B, C, F
certification Novell 50-682 50-682 50-682 examen
NO.24 Using the UAL licensing model, where is it recommended to install user license if the
server object resides in the FLIGHTOPS.DEL.DIGITALAIR container and the user
objects reside in the CUSTSERV.DEL.DIGITALAIR container?
A. In any container.
B. In the Security container.
C. In the DIGITALAIR container.
D. In the CUSTSERV.DEL.DIGITALAIR container.
E. In the CUSTSERV.DEL.DIGITALAIR or DEL.DIGITALAIR containers.
F. In the FLIGHTOPS.DEL.DIGITALAIR or DEL.DIGITALAIR containers.
Answer: E
certification Novell 50-682 50-682 50-682 examen
NO.25 .Which preconfigured report searched the entire tree, communicates with every NetWare
server it finds, and reports errors?
A. Agent Health
B. Obituary Listing
C. Object Statistics
D. Server Information
E. Service Advertising
Answer: D
Novell certification 50-682 50-682 50-682 50-682
NO.26 .What happens during the Finish eDirectory Migration stage of a server migration to
NetWare 6 process? (Choose two)
A. The NICI files are copied.
B. The licenses are installed.
C. The volume objects are updated.
D. The destination server is restarted.
E. The file trustee assignment are restored.
Answer: C, E
Novell examen certification 50-682 certification 50-682 50-682 certification 50-682
NO.27 .Click on the object that will allow you to specify the amount of time to wait for
nodes to join the cluster.
Answer:
NO.28 Which is a useful troubleshooting step if a server is not communicating?
A. Verify that cache buffers are over 20%.
B. Verify that the server is not out of packet receive buffers.
C. Verify that the DOS=HIGH command is not in CONFIG.SYS.
D. Remove memory managers from loading in AUTOEXEC.NCF.
Answer: B
certification Novell certification 50-682 certification 50-682 certification 50-682 50-682
NO.29 In a NCS environment, a resource state of ALERT has been placed on a resource.
What is a reason that a resource would be in an ALERT state?
A. The resource is shut down or in an inactive state.
B. The resource is unloading from the server it was running on.
C. The resource is not running and requires administrator intervention.
D. There isn't an assigned node up that the resource can be loaded on.
E. The Start, Failover, or Failback mode for the resource has been set to manual.
Answer: E
Novell examen 50-682 certification 50-682 50-682
NO.30 Which abend is almost always memory related?
A. Page fault
B. Invalid Opcode
C. Non Maskable Interrupt
D. General Protection Processor Exception
E. Ate Poison Pill in SbdWriteNode Tick given by some other node.
Answer: C
Novell 50-682 50-682 examen
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Novell 50-682. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
没有评论:
发表评论