Novell meilleur examen 050-710, questions et réponses

Il y a plusieurs de façons pour réussir le test Novell 050-710, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Novell 050-710 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Novell 050-710 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

050-710 est un test de Novell Certification, donc réussir 050-710 est le premier pas à mettre le pied sur la Certifiction Novell. Ça peut expliquer certiainement pourquoi le test Novell 050-710 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test 050-710. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Novell 050-710. Ce ne sera pas un problème à réussir le test Novell 050-710 si vous préparez le test avec notre guide d'étude.

Code d'Examen: 050-710
Nom d'Examen: Novell (Novell Certified Linux Administrator)
Questions et réponses: 134 Q&As

Un bon choix de l'outil à se former est le point essentiel à passer le test Novell 050-710, et les documentations à propos de rechercher le test Novell 050-710 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

050-710 Démo gratuit à télécharger: http://www.pass4test.fr/050-710.html

NO.1 Which statements about partitions are correct? (Choose 3.)
A. Extended partitions can be subdivided into logical partitions.
B. A primary partition consists of a continuous range of cylinders.
C. Logical partitions do not require entries in the main partition tablE.
D. If you use only primary partitions, you are limited to eight partitions per disk.
E. SUSE Linux Enterprise Server 10 can only be installed on a primary partition.
F. To install more than one operating system on a partition, the partition has to include the entire cylinder
rangE.
Answer: ABC

certification Novell   050-710 examen   050-710   050-710 examen

NO.2 Which command can be used to view the inode assigned to a filename?
A. ls -i
B. fsck -h -i
C. inode --list
D. cat /proc/inodes
Answer: A

certification Novell   certification 050-710   050-710   050-710

NO.3 Which user authentication methods can be used with SLES 10? (Choose 4.)
A. NIS
B. WEP
C. SSH
D. PAM
E. LDAP
F. Handshake
G. Windows Domain
H. Local (/etc/passwd)
Answer: AEGH

certification Novell   050-710   050-710 examen

NO.4 What is the correct order of steps to change the partition table using fdisk?
A. You can't use fdisk to change a partition tablE.
B. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Reboot.
C. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Load the
partition table from the boot prompt.
D. Start fdisk > Change the partition table > Write the partition table to floppy disk or USB stick > Exit
fdisk > Boot from floppy disk or USB stick.
Answer: B

Novell examen   050-710   050-710

NO.5 Which is the main configuration file for logrotate?
A. /etc/logrotate
B. /etc/logr.conf
C. /etc/cron/logrotate
D. /etc/logrotatE. conf
Answer: D

Novell   050-710 examen   050-710

NO.6 You would like to run command1 and then command2, whether or not command1 completed
successfully. Which command accomplishes this task?
A. command1 | command2
B. command1 ; command2
C. command1 > command2
D. command1 & command2
Answer: B

Novell   certification 050-710   050-710 examen   050-710 examen

NO.7 How large is an inode?
A. 256 bits
B. 64 Kbytes
C. 128 bytes
D. 1 Mbyte
Answer: C

Novell   certification 050-710   certification 050-710   certification 050-710

NO.8 Waht is the correct syntax for mounting the second partition of the first SCSI hard disk?
A. mount /mnt /dev/hda2
B. mount /dev/hda2 /mnt
C. mount /dev/sdb1 /mnt
D. mount /mnt /dev/sdb1
E. mount /dev/sda2 /mnt
F. mount /mnt /dev/sda2
Answer: E

certification Novell   050-710   certification 050-710   certification 050-710

NO.9 Which command can you use to check an ext2/ext3 file system for a correct superblock, faulty data
blocks, or faulty allocation of data blocks?
A. df
B. du
C. fdisk
D. e2fsck
E. reiserfsck
Answer: D

Novell   050-710 examen   certification 050-710   certification 050-710

NO.10 Why are the noauto and users options used with /etc/fstab?
A. A normal user is not allowed to access this partition.
B. They allow any user to mount and unmount a partition.
C. They specify the partitions that are bootable by a user.
D. They specify the partitions that are not bootable by a user.
Answer: B

Novell   050-710   certification 050-710   050-710   certification 050-710

NO.11 Which command is used to enter or change the quota for user tux?
A. quotacheck
B. repquota tux
C. edquota -u tux
D. edquota -g tux
E. /sbin/quotaon tux
Answer: C

Novell examen   050-710   050-710 examen   050-710

NO.12 Which are journaling file systems? (Choose 3.)
A. XFS
B. ext2
C. ext3
D. VFAT
E. minix
F. VFAT32
G. ReiserFS
Answer: ACG

Novell   050-710   050-710 examen   050-710   certification 050-710

NO.13 As system administrator root, you use the lpoptions command to change printer options, such as the
page sizE. To which file are these options saved?
A. ~/.bashrc
B. ~/.lpoptions
C. /etc/cups/lpoptions
D. /etc/sysconfig/cups
Answer: C

Novell   050-710 examen   050-710   050-710

NO.14 Which statement about the /sbin/ldconfig command is correct?
A. The ldconfig command is used to link directories.
B. The ldconfig command is used to configure an LDAP connection.
C. The ldconfig command is used to update the software library cachE.
D. The ldconfig command is used to show dynamic libraries needed by a program.
Answer: C

Novell examen   certification 050-710   050-710 examen   050-710 examen   certification 050-710

NO.15 What information do you need to set up an LDAP client? (Choose 4.)
A. LDAP version
B. LDAP base DN
C. Kind of encryption
D. Synchronization frequency
E. Address of the LDAP server
F. File name of the LDAP database
Answer: ABCE

certification Novell   050-710 examen   050-710   050-710 examen

NO.16 In which file is the host name of a Linux computer configured? (Hint: You do not need to include the
entire patH. )
Answer:______
Answer:

NO.17 Which statements about the LVM components are correct? (Choose 2.)
A. A volume group is part of a logical volumE.
B. Logical volumes are grouped in a master group.
C. A volume group always consists of one physical volumE.
D. A physical volume can be a partition or an entire hard disk.
E. A volume group can be reduced in size by removing physical volumes.
F. The operating system accesses the volume groups like conventional physical partitions.
Answer: DE

Novell   certification 050-710   certification 050-710   050-710

NO.18 Which command can you use to create a Reiser file system on the sda6 partition? (Choose 2.)
A. mkreiserfs /dev/sda6
B. fdisk.reiserfs /dev/sda6
C. makE. reiserfs /dev/sda6
D. fdisk -t reiserfs /dev/sda6
E. mkfs -t reiserfs /dev/sda6
Answer: AE

Novell   certification 050-710   050-710   050-710 examen

NO.19 You want to view the last 20 lines of the /var/log/messages file and any new lines that are subsequently
added by syslog to this filE. Which command would you use?
A. tail -20f /var/log/messages
B. end -20f /var/log/messages
C. less -20f /var/log/messages
D. follow -20 /var/log/messages
Answer: A

certification Novell   050-710 examen   certification 050-710   050-710 examen

NO.20 What is the minimum number of partitions required by a SLES 10 system?
A. None
B. 1
C. 2
D. 4
Answer: C

Novell   certification 050-710   050-710   050-710

Le test certification Novell 050-710 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Novell 050-710 puisse augmenter la compétition dans ce marché.