Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A IBM A2180-184. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test IBM A2180-184 sans aucune doute.
Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test IBM A2090-733 à la première fois.
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Ajoutez le produit de Pass4Test au panier, vous pouvez participer le test avec une 100% confiance. Bénéficiez du succès de test IBM C2140-132 par une seule fois, vous n'aurez pas aucune raison à refuser.
Code d'Examen: A2180-184
Nom d'Examen: IBM (Assessment: IBM WebSphere Message Broker V7.0, System Administration)
Questions et réponses: 104 Q&As
Code d'Examen: A2090-733
Nom d'Examen: IBM (Assessment: DB2 9 Application Development)
Questions et réponses: 140 Q&As
Code d'Examen: C2140-132
Nom d'Examen: IBM (IBM Rational ClearQuest v7.1)
Questions et réponses: 80 Q&As
On doit faire un bon choix pour passer le test IBM C2140-132. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification IBM C2140-132 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
A2090-733 Démo gratuit à télécharger: http://www.pass4test.fr/A2090-733.html
NO.1 Which of the following is a SQL stored procedure which will return a resultset
containing ID, NAME,
DEPT and JOB values out of the STAFF table?
A. CREATE PROCEDURE result_set() LANGUAGE SQL BEGIN SELECT id, name, dept,
job FROM
staff; END
B. CREATE PROCEDURE result_set LANGUAGE SQL RESULT SETS 1 BEGIN SELECT
id, name,
dept, job FROM staff; END
C. CREATE PROCEDURE result_set RESULT SETS 1 BEGIN DECLARE c1 CURSOR FOR
SELECT id,
name, dept, job FROM staff; OPEN C1; END
D. CREATE PROCEDURE result_set()
LANGUAGE SQL RESULT SETS 1 BEGIN DECLARE c1 CURSOR WITH RETURN FOR
SELECT id,
name, dept, job FROM staff; OPEN c1; END
Answer: D
certification IBM A2090-733 certification A2090-733
NO.2 An SQL procedure has been developed with several inline SQL PL statements
encapsulated in a
dynamic compound SQL statement. The procedure had been tested and performed well.
After making a
change to the last SQL statement the procedure not only failed to complete, but did not
produce output
from any statements which were not modified. What is the best explanation for this behavior?
A. The dynamic compound SQL is atomic.
B. The procedure doesn't have any savepoints.
C. The procedure has not been correctly re-cataloged.
D. The dynamic compound SQL individual statements are logically dependent on each other.
Answer: A
certification IBM certification A2090-733 certification A2090-733
NO.3 Parameter markers are NOT permitted for which of the following statements?
A. CALL
B. DELETE C. EXECUTE IMMEDIATE
D. SET CURRENT SQLID
Answer: C
IBM certification A2090-733 A2090-733 examen A2090-733 examen
NO.4 After installing the DB2 Express-C 9 it was discovered that the Development
Workbench was not
available. What
was the reason for that?
A. It must be installed separately.
B. It is not supported with DB2 Express-C 9.
C. Since it is a licensed tool, it must be purchased from IBM.
D. Review the DB2 installation log for errors. Reinstall DB2 Express-C 9.
Answer: A
certification IBM A2090-733 examen A2090-733 examen A2090-733 examen certification A2090-733
NO.5 Given the following table definition:CREATE TABLE staff ( id SMALLINT NOT NULL,
name
VARCHAR(9), dept SMALLINT, job CHAR(5)) Assuming that the following statements
execute
successfully:Dim cmdStaff As DB2Command = cnDb2.CreateCommand()
cmdStaff.CommandText =
"SELECT name FROM staff WHERE (job = @job)" Which of the following is the correct way
to provide a
value for the parameter marker used?
A. cmdStaff.Parameters.Add("@job", "Mgr", CType(5, Char))
B. cmdStaff.Parameters.Add("@job", "Mgr", DB2Type.Char, 5)
C. cmdStaff.Parameters.Add(New DB2Parameter("@job", CType(5, Char))
cmdStaff.Parameters("@job").Value = "Mgr"
D. cmdStaff.Parameters.Add(New DB2Parameter("@job", DB2Type.Char, 5)
cmdStaff.Parameters("@job").Value ="Mgr"
Answer: D
IBM examen A2090-733 A2090-733 examen
NO.6 Two OLTP applications run concurrently but frequent locking occurs which requires a
fix to be applied.
Application A inserts rows into the table T1. Application B submits several queries against the
table with a
Cursor Stability isolation level. What would be the best course of action to improve the
system's
concurrency and performance?
A. Application B should be changed to access a view of table T1.
B. Application B should be changed to a Read Stability isolation level.
C. Application A should be changed to perform a commit after each INSERT operation.
D. Application A should be changed to include the NOT WITH HOLD clause on each INSERT
operation.
Answer: C
certification IBM A2090-733 certification A2090-733 A2090-733 examen
NO.7 Given the following table and view definitions: CREATE TABLE city ( cityid INT
GENERATED
ALWAYS AS IDENTITY , city_name CHAR(10), state_code CHAR(2) CHECK(state_code IN
('CA','IL','NY','OH','TX')));CREATE VIEW city_view AS ( SELECT city_name||','||state_code
AS fullname
FROM city WHERE state_code NOT IN ('OH','IL')); and the following trigger
definition:CREATE
TRIGGER city_viewInput INSTEAD OF INSERT ON city_view REFERENCING NEW AS
nFOR EACH
ROW MODE DB2SQLBEGIN ATOMIC DECLARE delim INT;SET delim = LOCATE(',',
n.fullname);
INSERT INTO city(city_name,state_code) VALUES(SUBSTR(n.fullname, 1, delim - 1),
SUBSTR(n.fullname, delim + 1, 2));END; If the following SQL statments are
executed:INSERT INTO city
VALUES(DEFAULT,'San Jose','CA') ; INSERT INTO city_view VALUES('Chicago,IL');
INSERT INTO city
VALUES(DEFAULT,'Detroit','MI'); INSERT INTO city VALUES(DEFAULT,'Austin','TX');
INSERT INTO
city_view VALUES('Denver,CO'); How many rows will be returned by the following query:
SELECT *
FROM city
A. 1
B. 2
C. 3
D. 4
Answer: C
IBM examen A2090-733 examen A2090-733 examen certification A2090-733 certification A2090-733 A2090-733 examen
NO.8 An application running against a DB2 for AIX database needs to execute the following
query:SELECT
t2.c2, t1.c3 FROM t1 INNER JOIN t2 ON t1.c1 = t2.c1 If table T1 resides in the DB2 for AIX
database and
table T2 resides in a DB2 for i5/OS database, which of the followingDB2 object types must
the identifier
T2 represent in order for this SQL statement to run successfully?
A. ALIAS
B. NICKNAME
C. SERVER TABLE
D. TABLE WRAPPER
Answer: B
IBM examen certification A2090-733 A2090-733 examen certification A2090-733 A2090-733 examen
没有评论:
发表评论