Le Certificat de Microsoft 98-375 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Microsoft 98-375, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 98-375 sans aucun éffort, en même temps, le test de Microsoft 98-375 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Microsoft 98-375 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
La population de la Certification Microsoft 070-561-Csharp est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
Finalement, la Q&A Microsoft 070-561-Csharp plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Microsoft 070-561-Csharp est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Microsoft, vous aurez un meilleur salaire et une plus grande space à se développer.
Code d'Examen: 98-375
Nom d'Examen: Microsoft (HTML5 Application Development Fundamentals)
Questions et réponses: 89 Q&As
Code d'Examen: 070-561-Csharp
Nom d'Examen: Microsoft (TS:MS.NET Framework 3.5,ADO.NET Application Development)
Questions et réponses: 100 Q&As
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Microsoft 070-561-Csharp, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Microsoft 070-561-Csharp avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Microsoft 070-561-Csharp sans aucune doute.
Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.
070-561-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/070-561-Csharp.html
NO.1 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses Microsoft SQL Server 2005. You write the following code segment. (Line
numbers are included for reference only.) 01 String myConnString = "User 02 ID=;password=;Initial
03 Catalog=pubs;Data Source=myServer"; 04 SqlConnection myConnection = new 05
SqlConnection(myConnString); 06 SqlCommand myCommand = new SqlCommand(); 07 DbDataReader
myReader; 08 myCommand.CommandType = 09 CommandType.Text; 10 myCommand.Connection =
myConnection; 11 myCommand.CommandText = "Select * from Table1; Select * from Table2;"; 12 int
RecordCount = 0; 13 try 14 { 15 myConnection.Open(); 16 17 } 18 catch (Exception ex) 19 { 20 } 21 finally
22 { 23 myConnection.Close(); 24 } You need to compute the total number of records processed by the
Select queries in the RecordCount variable. Which code segment should you insert at line 16?
A.myReader = myCommand.ExecuteReader();RecordCount = myReader.RecordsAffected;
B.while (myReader.Read()){ //Write logic to process data for the first result.}RecordCount =
myReader.RecordsAffected;
C.while (myReader.HasRows){ while (myReader.Read()) { //Write logic to process data for the second
result. RecordCount = RecordCount + 1; myReader.NextResult(); }}
D.while (myReader.HasRows){ while (myReader.Read()) { //Write logic to process data for the second
result. RecordCount = RecordCount + 1; } myReader.NextResult();}
Answer:D
Microsoft examen 070-561-Csharp 070-561-Csharp examen certification 070-561-Csharp
NO.2 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You write the following code
segment. string sql = "Select InvoiceNo,OrderAmount from Orders"; SqlDataAdapter adp = new
SqlDataAdapter(sql, con); DataTable tblOrders = new DataTable(); adp.Fill(tblOrders); If the value
of the OrderAmount column is greater than 1000, then a discount of 5 percent is calculated. You
need to create a DataColumn object named Discount that contains the discount value for each row
in the tblOrders DataTable. Which code segment should you use?
A.DataColumn col = new DataColumn("Discount");col.Expression =
"IIF(OrderAmount>1000,OrderAmount*5/100,0)";tblOrders.Columns.Add(col);
B.DataColumn col = new DataColumn("Discount");col.DefaultValue =
"IIF(OrderAmount>1000,OrderAmount*5/100,0)";tblOrders.Columns.Add(col);
C.DataColumn col = new
DataColumn("Discount");tblOrders.Columns.Add(col);tblOrders.Compute("Discount=OrderAmou
nt*5/100","OrderAmount>1000");
D.DataColumn col = new DataColumn("Discount");tblOrders.Columns.Add(col);col.Expression=
tblOrders.Compute("OrderAmount*5/100","OrderAmount>1000").ToString();
Answer:A
Microsoft examen 070-561-Csharp examen certification 070-561-Csharp
NO.3 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a typed DataSet named DSOrders. The DSOrders DataSet has two DataTables
as shown in the following sequence: 1. Orders 2. Customers You write the following code
segment. DSOrders ds = new DSOrders(); IDataReader rd; You need to expose the two DataTables
as a DataReader stream. You also need to ensure that the Customers DataTable is the first
DataTable in the stream. Which code segment should you add?
A.rd = ds.CreateDataReader(ds.Customers);
B.rd = ds.CreateDataReader(ds.Customers, ds.Orders);
C.ds.DefaultViewManager.CreateDataView(ds.Customers);rd = ds.CreateDataReader();
D.ds.Customers.Prefix = "0";ds.Orders.Prefix = "1";rd = ds.CreateDataReader();
Answer:B
Microsoft examen certification 070-561-Csharp 070-561-Csharp examen 070-561-Csharp examen
NO.4 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a database named ContosoDB. The database resides on a server
named ContosoSrv. You generate the following files: A storage schema definition file named
Contoso.ssdl A conceptual schema definition file named Contoso.csdl A mapping schema
definition file named Contoso.msl You alter the contents of the Contoso.csdl and Contoso.msl
files. You need to generate the .NET Framework entities from the altered schema definitions.
Which command should you use?
A.Edmgen.exe /mode:EntityClassGeneration /project:Contoso /incsdl:Contoso.csdl
B.Edmgen.exe /mode:FromSsdlGeneration /project:Contoso /inssdl:Contoso.ssdl
/outcsdl:Contoso.csdl
C.Edmgen.exe /mode:ViewGeneration /project:Contoso /inssdl:Contoso.ssdl /incsdl:Contoso.csdl
/inmsl:Contoso.msl /outobjectlayer:Contoso
D.Edmgen.exe /mode:FullGeneration /project:Contoso /provider:System.Data.SqlClient
/connectionstring:"server=ContosoSrv;integrated security=true;database=ContosoDB"
Answer:A
Microsoft examen 070-561-Csharp examen 070-561-Csharp certification 070-561-Csharp
NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You run the application under
a Least-Privilege User Account (LUA) of the Windows operating system. You need to configure the
SQL Server 2005 connection string in the app.config file to use SQL Server Express user
instances. Which code segment should you use?
A.Data Source=\\SQLExpress;Integrated
Security=true;AttachDBFilename=|DataDirectory|\InstanceDB.mdf;Initial Catalog=InstanceDB;
B.Data Source=\\SQLExpress;Integrated Security=true;User
Instance=true;AttachDBFilename=InstanceDB.mdf;Initial Catalog=InstanceDB;
C.Data Source=\\SQLExpress;Integrated Security=true;User
Instance=true;AttachDBFilename=|DataDirectory|\InstanceDB.mdf;Initial Catalog=InstanceDB;
D.Data Source=\\SQLExpress;Integrated Security=false;User
Instance=true;AttachDBFilename=|DataDirectory|\InstanceDB.mdf;Initial Catalog=InstanceDB;
Answer:C
Microsoft examen certification 070-561-Csharp certification 070-561-Csharp certification 070-561-Csharp 070-561-Csharp
NO.6 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You write the following code segment. DataTable tbl = new DataTable(); DataColumn colId =
tbl.Columns.Add( "ID", typeof(int)); colId.AutoIncrement = true; tbl.Constraints.Add("Pkey", colId,
true); DataColumn colCtry = tbl.Columns.Add( "Country", typeof(string)); colCtry.DefaultValue =
"USA"; tbl.Columns.Add("Name", typeof(string)); You need to create a new row in the tbl
DataTable that meets the following requirements: The ID column is set to an auto-incremented
value. The Country column is set to the default value. The Name column is set to the value
"Customer A". Which code segment should you use?
A.tbl.Rows.Add(0, null, "Customer A");
B.tbl.Rows.Add(null, null, "Customer A");
C.tbl.Rows.Add(null, DBNull.Value, "Customer A");
D.tbl.Rows.Add(DBNull.Value, DBNull.Value, "Customer A");
Answer:B
Microsoft examen 070-561-Csharp examen certification 070-561-Csharp certification 070-561-Csharp 070-561-Csharp examen 070-561-Csharp examen
NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following
columns: ID OrderID ProductID Quantity LineTotal The OrderDetailTable object is populated with
data provided by a business partner. Some of the records contain a null value in the LineTotal field
and 0 in the Quantity field. You write the following code segment. (Line numbers are included for
reference only.) 01 DataColumn col = new DataColumn("UnitPrice", typeof(decimal)); 02 03
OrderDetailTable.Columns.Add(col); You need to add a DataColumn named UnitPrice to the
OrderDetailTable object. Which line of code should you insert at line 02?
A.col.Expression = "LineTotal/Quantity";
B.col.Expression = "LineTotal/ISNULL(Quantity, 1)";
C.col.Expression = "LineTotal.Value/ISNULL(Quantity.Value,1)";
D.col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)";
Answer:D
Microsoft examen 070-561-Csharp examen certification 070-561-Csharp 070-561-Csharp certification 070-561-Csharp
NO.8 You create an application by using Microsoft .NET Framework 3.5. You use Microsoft ADO.NET
Entity Framework for persistence. You write a conceptual schema definition for the entity data
model in the following manner. You need to retrieve all the InvoiceNo property values for the
Customer entity instance that has the CustomerID property value as 1. Which entity SQL query
should you use?
A.SELECT o.InvoiceNo FROM ContosoEntities.Order as o,ContosoEntities.Customer as c WHERE
c.CustomerID=1
B.SELECT o.InvoiceNo FROM ContosoEntities.Order as o, ROW(o.Customer) as c WHERE
c.CustomerID=1
C.SELECT o.InvoiceNo FROM ContosoEntities.Order as o WHERE (Select REF(c) from
ContosoEntities.Customer as c WHERE CustomerID=1)
D.SELECT o.InvoiceNo FROM ContosoEntities.Order as o, o.Customer as c WHERE
c.CustomerID=1
Answer:D
Microsoft examen certification 070-561-Csharp certification 070-561-Csharp 070-561-Csharp examen 070-561-Csharp examen
没有评论:
发表评论