Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Extreme Networks EW0-300. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Extreme Networks EW0-300 sans aucune doute.
Beaucoup de gens trouvent difficile à passer le test Extreme Networks EW0-300, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Extreme Networks EW0-300 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Extreme Networks EW0-300 et passer le test à la première fois.
Pass4Test est un catalyseur de votre succès de test Extreme Networks EW0-300. En visant la Certification de Extreme Networks, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Extreme Networks EW0-300, la Q&A Extreme Networks EW0-300 est un bon choix pour vous.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Extreme Networks EW0-300.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Extreme Networks EW0-300. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Code d'Examen: EW0-300
Nom d'Examen: Extreme Networks (Extreme Networks Specialist....)
Questions et réponses: 158 Q&As
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Extreme Networks EW0-300 dans Pass4Test pour se former avant le test Extreme Networks EW0-300.
EW0-300 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-300.html
NO.1 In Extreme Ware, which one of the following is an optional ESRP configuration
that allows you to connect active hosts directly to an ESRP master or standby
switch.
A. ESRP Groups
B. ESRP Domain
C. ESRP Host Attach
D. None of these
Answer: C
Extreme Networks examen EW0-300 certification EW0-300 EW0-300 EW0-300
NO.2 An LSP is a link state packet used by which routing protocol?
A. OSPF
B. RIP
C. BGP
D. None of these
Answer: D
Extreme Networks EW0-300 certification EW0-300
NO.3 An IP-only IS-IS router (or "IP-only" router) is defined to be
A. A router which uses IS-IS as the routing protocol for IP
B. Does not otherwise support OSI protocols
C. One of the IS-IS router types
D. All of the above
Answer: D
Extreme Networks EW0-300 certification EW0-300 EW0-300 certification EW0-300 EW0-300 examen
NO.4 OSPF requires that all areas attach directly to the backbone area, and that all
attachments are made with a direct physical connection.
A. True
B. False
Answer: B
certification Extreme Networks EW0-300 certification EW0-300 EW0-300 EW0-300
NO.5 Extreme Networks IS? Chipset switches allows you to run simultaneously the
Radius and Tacacs+features.
A. True
B. False
Answer: B
certification Extreme Networks certification EW0-300 certification EW0-300
NO.6 The following CLI command is valid to advertise SLB virtual servers in OSPF ith a
cost of 10.
Enable ospf export vip cost 10
A. True
B. False
Answer: A
Extreme Networks EW0-300 EW0-300 EW0-300 examen
NO.7 In PIM sparse mode the Bootstrap Router election is based on the highest IP
address.
A. True
B. False
Answer: B
Extreme Networks examen EW0-300 examen certification EW0-300 certification EW0-300 EW0-300
NO.8 It is possible to set an STP-threshold to switch from a shared tree to a shortest path
tree. This switch over will be initiated by:
A. The Rendezvous Point
B. The Bootstrap Router
C. A last hop router
D. The router nearest to the source
Answer: C
certification Extreme Networks certification EW0-300 certification EW0-300 certification EW0-300 EW0-300 EW0-300
NO.9 How does an IGMP router learns about the existence of hosts in multicast groups:
A. By receiving a response on an IGMP membership query
B. By looking into the ARP cache
C. There is no dynamic learning process, instead static FDB entries are used
D. None of the above
Answer: A
Extreme Networks examen EW0-300 examen certification EW0-300 EW0-300
NO.10 Exhibit:
According to accompanying diagram and ACL configuration it is possible for Host
A (10.10.10.100) and Host C (30.30.30.100) to successfully communicate.
A. TRUE
B. FALSE
Answer: A
certification Extreme Networks certification EW0-300 EW0-300
NO.11 Extreme Ware 7.0 can support which OSPF authentication on a per VLAN basis:
A. MD5
B. Simple-password
C. Encrypted simple-password
D. All of these
Answer: D
Extreme Networks EW0-300 certification EW0-300 EW0-300 EW0-300 examen
NO.12 How many bits in the IP TOS field does a Summit 48i examine?
A. 4
B. 6
C. 8
D. 16
Answer: B
Extreme Networks EW0-300 examen certification EW0-300 EW0-300 EW0-300 examen certification EW0-300
NO.13 The following modes of operation are supported with the Network login feature.
(choose all that apply)
A. Secure mode
B. Campus mode
C. Quick Mode
D. ISP mode
Answer: A,B,C,D
certification Extreme Networks EW0-300 examen certification EW0-300 certification EW0-300
NO.14 EAPS protection switching is similar to what can be achieved with the Spanning
Tree Protocol but one of the big advantages of EAPS is:
A. EAPS also supports star topologies
B. EAPS has a recovery time of less than a second in case of link failure.
C. An EAPS domain supports multiple root bridges, thus alternative path
D. EAPS eliminates the need for protocols like ESRP or VRRP that bring default
gateway redundancy.
Answer: B
Extreme Networks examen certification EW0-300 certification EW0-300 EW0-300
NO.15 On an Extreme Networks switch, how many bits comprise an OSPF area ID?
A. 32 BITS
B. 48 BITS
C. 64 BITS
D. 128 BITS
Answer: A
certification Extreme Networks EW0-300 examen EW0-300 examen certification EW0-300 EW0-300
NO.16 What is the CLI command you would use to configure a VLAN to be protected by
ESRP?
A. enable esrp vlan <vlan>
B. enable esrp vlan <vlan> detail
C. config esrp vlan <vlan>
D. config esrp vlan <vlan> detail
Answer: A
Extreme Networks EW0-300 EW0-300 EW0-300 EW0-300 certification EW0-300
NO.17 Which CLI command configures DVMRP on all IP multicast interfaces.
A. config dvmrp add vlan all
B. config dvmrp add all
C. enable dvmrp
D. enable dvmrp vlan all
Answer: A
Extreme Networks examen EW0-300 examen EW0-300
NO.18 When limit-learning is configured on a port and the limit is reached the following
traffic still flows to the port.
A. Packets destined for the active Mac addresses
B. Broadcast traffic
C. EDP traffic
D. All of the above
Answer: D
Extreme Networks examen EW0-300 EW0-300 EW0-300 EW0-300 examen
NO.19 An Ethernet Automatic Protection Switching (EAPS) domain relies on a control
VLAN.
The ports in that control VLAN ports must be tagged, and participating in the ring
only.
A. True
B. False
Answer: A
Extreme Networks EW0-300 EW0-300 EW0-300 examen certification EW0-300
NO.20 ESRP-enabled switches can utilize either an IP address or an IPX net ID for their
protected VLANs.
A. TRUE
B. FALSE
Answer: A
Extreme Networks examen EW0-300 EW0-300 examen EW0-300
NO.21 According
to accompanying diagram and ACL configuration it is possible to telnet
from host A to any of the switch IP addresses.
A. True
B. False
Answer: B
Extreme Networks examen EW0-300 certification EW0-300 EW0-300 examen certification EW0-300
NO.22 The maximum number of EAPS domains supported per switch and ring is?
A. 64
B. 32
C. 16
D. 8
Answer: A
Extreme Networks EW0-300 EW0-300 examen EW0-300 certification EW0-300 certification EW0-300
NO.23 On a RADIUS server you can distinguish between switch access and Netlogin
authentication. Extreme provides a vendor specific attribute
Extreme:Extreme-Netlogin-only =disabled/enabled.
User authentication for both Netlogin and switch access is allowed when the value is
disabled.
When the value enabled user authentication is restricted to Netlogin only.
A. True
B. False
Answer: A
Extreme Networks certification EW0-300 certification EW0-300 EW0-300
NO.24 In OSPF, the router type that is required to connect an area with another area is
the:
A. Designated Router
B. Back-up Designated Router
C. ASBR
D. ABR
Answer: D
Extreme Networks examen EW0-300 examen EW0-300
NO.25 Extreme ware 7.0 supports both level1 and level 2 IS-IS routers.
A. TRUE
B. FALSE
Answer: A
Extreme Networks EW0-300 EW0-300 EW0-300 EW0-300 examen
NO.26 In SLB, Port Translation Mode is similar to Translation Mode,except that in Port
Translation Mode the physical Port where the node connects to must be configured
as a Fast Ethernet Half Duplex port.
A. True
B. False
Answer: B
Extreme Networks certification EW0-300 certification EW0-300 EW0-300
NO.27 The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP
and OSI) routers.
A. True
B. False
Answer: A
certification Extreme Networks EW0-300 EW0-300 examen
NO.28 The majority of Extreme Networks switches have a dedicated out of band
management port and VLAN. The 10/100BASE-TX Ethernet management port
allows you to communicate directly to the CPU of the switch. If you want the switch
to forward traffic from the mgmt VLAN to other VLANS you just have to enable
ipforwarding on all VLANS including the management VLAN.
A. TRUE
B. FALSE
Answer: B
Extreme Networks EW0-300 certification EW0-300 EW0-300 examen
NO.29 Which of the following statements fit the description of PIM sparse mode? (choose
three that apply)
A. PIM sparse mode is suitable for network with minimal multicast deployment.
B. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
C. In PIM sparse mode the RPF check depends on the tree type
D. An explicit join is not required in PIM sparse mode.
Answer: A,B,C,D
Extreme Networks EW0-300 examen EW0-300 EW0-300 certification EW0-300
NO.30 What is the RP-set?
A. It is the information of which RP are available for what Multicast groups.
It is send by the BSR towards all PIM routers
B. It is the information of which multicast groups are active
It is send by the RP towards all PIM routers
C. It is the information of which BSR are available for what Multicast groups.
It is send by RP towards all PIM routers
D. It is the information, stored by all RP, needed to find the BSR,
Answer: A
certification Extreme Networks EW0-300 examen EW0-300
Le test simulation Extreme Networks EW0-300 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Extreme Networks EW0-300 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
没有评论:
发表评论